|
Title: Where is my Problem? Post by: howtotman on August 24, 2013, 04:05:31 PM Hi,
I'm absolut new in this stuff. My english is not the best please be permissive :-) I tried to read the ECU from my 1998 S4 B5 with NefMoto ME7 ECU Flasher. It conects but after 5 seconds the conection breaks up with: Disconnecting because no response was received for the Tester Present message. I tried original Ross tech device and one other usb device... nothing worked. Whre is my Problem? I attached the log perhaps it helps you. Thank you! Dominik Title: Re: Where is my Problem? Post by: userpike on August 24, 2013, 04:14:54 PM This happened to me the other night. I just closed Nefmoto, unplugged and replugged in the obd to usb dongle. I waited to make sure I heard and saw that the computer recognized the usb was plugged in and reopened nef then went on as usual.
Title: Re: Where is my Problem? Post by: howtotman on August 25, 2013, 05:24:44 AM Hi,
tried it many times.. nothing. Tried ohter pc other drivers usw. Any ohter ideas? Best regards Dominik Title: Re: Where is my Problem? Post by: ddillenger on August 25, 2013, 10:56:44 AM Hi, I'm absolut new in this stuff. My english is not the best please be permissive :-) I tried to read the ECU from my 1998 S4 B5 with NefMoto ME7 ECU Flasher. It conects but after 5 seconds the conection breaks up with: Disconnecting because no response was received for the Tester Present message. I tried original Ross tech device and one other usb device... nothing worked. Whre is my Problem? I attached the log perhaps it helps you. Thank you! Dominik You will never be able to flash your 98 in car due to the cluster. Title: Re: Where is my Problem? Post by: howtotman on August 25, 2013, 02:34:47 PM Hi,
hm ok that means it is only possible on the bench? Title: Re: Where is my Problem? Post by: Joksa_ on November 28, 2013, 11:59:53 AM Hi,
by the way ddillenger, what is the reason why its not possible to flash to 98 from obd? You mention that cluster is the reason, because of noisy k-line? Joska |