|
Title: Audi 2.7 APB vs BEL Post by: EarthWalker on August 13, 2022, 04:14:00 PM Greetings folks,
I was driving a 01 allroad w/APB that I had customized an 8D0 Mbox definition - mainly to remove rear 02's and SAI when I did my manual swap. I'm now swapping that transmission into an 03 allroad with BEL engine - and it looks like I cannot use the same ECU due to wiring differences, however can I use the same definition file? Thanks Title: Re: Audi 2.7 APB vs BEL Post by: _nameless on August 13, 2022, 07:12:36 PM Greetings folks, Thats a no on all accounts I was driving a 01 allroad w/APB that I had customized an 8D0 Mbox definition - mainly to remove rear 02's and SAI when I did my manual swap. I'm now swapping that transmission into an 03 allroad with BEL engine - and it looks like I cannot use the same ECU due to wiring differences, however can I use the same definition file? Thanks Title: Re: Audi 2.7 APB vs BEL Post by: EarthWalker on August 15, 2022, 05:59:58 PM Thats a no on all accounts Ok one more question regarding this. When I flashed the 01 ecu (me7.1), I built a bench harness. Can I use the same bench harness on the me7.1.1 box or is that wiring different as well? Title: Re: Audi 2.7 APB vs BEL Post by: nyet on August 15, 2022, 06:34:39 PM yes, you can absolutely use the same bench flashing harness
|