Pages: [1]
Author Topic: Too much specified boost  (Read 5119 times)
Aramis
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: February 29, 2016, 03:44:49 AM »

Hello, i got polo gti 1.4 tsi dsg. Vcds shows 2600, 2700mbar specified boost. Car has got only intercooler and exhaust system. Sw is standart. I changed first map sensor before throttle. But nothing changed. What could be fault? Thanks.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #1 on: February 29, 2016, 05:53:16 AM »

Exhaust is now more free flowing, so amount of boost generated for a given duty is more, so you get an overboost?
Logged
Aramis
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #2 on: February 29, 2016, 07:30:37 AM »

I dont think cause of exhaust. Standart cars like a maximum 2100hpa around specified boost. Also car doesnt give any fault code.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #3 on: February 29, 2016, 08:07:27 AM »

Put stock hardware on and see if it does the same then.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-167
Offline Offline

Posts: 12235


WWW
« Reply #4 on: February 29, 2016, 11:06:21 AM »

So you post a noob question in the data logging board, without a data log?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
n0ble
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 192


« Reply #5 on: February 29, 2016, 01:49:10 PM »

You really need to post logs, also is it the twin charged engine?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 15 queries. (Pretty URLs adds 0.001s, 0q)