Pages: [1]
Author Topic: ECU replacement  (Read 3590 times)
Cika
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« on: February 15, 2014, 09:47:06 AM »

I need to change my ecu... looked for a replacement.. and i am asking which numbers on the sticker should be the same...with the replacement ecu..
(the picture is my ecu)
(tomorow i will have the picture of the other one)
Logged
_mumin_
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 46


« Reply #1 on: February 16, 2014, 03:08:17 AM »

You have to look for 028906021xx and You should pay attention to it to be in an aluminum housing because its 16bit ecu.
ECU's in the plastic housing are old 8bit.
Logged
JPower
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #2 on: February 18, 2014, 06:26:12 AM »

Older AFN ...

The safest way would be to search for "028906021CE" but if there is not exactly the same one you can also look for "028906021XX" which was mentioned before. Then you also will be able to clone it, which is your aim if I am not mistaken.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.052 seconds with 16 queries. (Pretty URLs adds 0s, 0q)