Title: Audi A6 C6 2006 Ecu Adaptation Post by: smurf786 on June 17, 2020, 06:53:04 AM Hi Guys,
I have a Audi A6 2006 with faulty ecu. I brought full kit to replace ecu, immo box etc.. I put it in but i'm getting error: P0610 Engine control unit incorrectly coded P3076 Coding Error Mil On I have eeprom for both ecu oriniginal and replacement. I believe the eeprom can be coded so it can be adapted. Can someone take a look at file and set corect adaptation on replacement and immo off on replacement? Or would the ecu require adaption using odis? If so, as i have pin for both ecu can it be done offline? Thank you, Title: Re: Audi A6 C6 2006 Ecu Adaptation Post by: nyet on June 17, 2020, 08:46:58 AM Why didn't you post the coding?
Title: Re: Audi A6 C6 2006 Ecu Adaptation Post by: _nameless on June 17, 2020, 09:17:31 AM Hi Guys, why not just bdm the first one and complete write to the new? problem solvedI have a Audi A6 2006 with faulty ecu. I brought full kit to replace ecu, immo box etc.. I put it in but i'm getting error: P0610 Engine control unit incorrectly coded P3076 Coding Error Mil On I have eeprom for both ecu oriniginal and replacement. I believe the eeprom can be coded so it can be adapted. Can someone take a look at file and set corect adaptation on replacement and immo off on replacement? Or would the ecu require adaption using odis? If so, as i have pin for both ecu can it be done offline? Thank you, Title: Re: Audi A6 C6 2006 Ecu Adaptation Post by: smurf786 on June 18, 2020, 02:52:45 AM Sorry BDM did not work
Title: Re: Audi A6 C6 2006 Ecu Adaptation Post by: bamofo on June 18, 2020, 10:31:10 AM Hi Guys, I have a Audi A6 2006 with faulty ecu. I brought full kit to replace ecu, immo box etc.. I put it in but i'm getting error: P0610 Engine control unit incorrectly coded P3076 Coding Error Mil On I have eeprom for both ecu oriniginal and replacement. I believe the eeprom can be coded so it can be adapted. Can someone take a look at file and set corect adaptation on replacement and immo off on replacement? Or would the ecu require adaption using odis? If so, as i have pin for both ecu can it be done offline? Thank you, What did you use to flash EEPROM / ROM? |