Throttle not "throttling"..

Pages: [1]

« previous next »

Author

Topic: Throttle not "throttling".. (Read 4191 times)

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 31

	Throttle not "throttling".. « on: May 10, 2016, 02:17:31 PM »

So after i changed my tb and mani with an R32 one (1.8t stock before) i tried to compensate for the new airflow over tb. How? My only way was through KFWDKMSN - Map for desired throttle plate angle. I almost doubled the axis values. I cant seem to find KFMSNWDK - Normalized mass flow over Throttle Plate to address the changes there to my file. And now the very strange to me issue. When the car is cold there is NO throttle response at ALL. Even with 100% depressed pedal 3-4% tb idling. Idling is crap until lambda kicks in and then everything works fine!! Huh

Any suggestions?? Also if someone can point me out for KFMSNWDK. I think its at 149CC before KLAF but it doesnt match..


« Last Edit: May 12, 2016, 07:31:22 AM by Rl »	Logged

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 31

	Re: Throttle not "throttling".. « Reply #1 on: May 12, 2016, 07:33:19 AM »

Any opinions?? Is there any chance KFMSNWDK missing from my file? I ve seen that map right before KLAF to 3-4 files but completely missing from 032QN.


	Logged

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	Re: Throttle not "throttling".. « Reply #2 on: May 12, 2016, 07:44:24 AM »

i found your missming map in about 5 seconds. 1C96E


	Logged

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 31

	Re: Throttle not "throttling".. « Reply #3 on: May 13, 2016, 07:58:48 AM »

You re completely right!! Roll Eyes

KLAF altering is really needed for that change?


	Logged

dream3R

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 1194

	Re: Throttle not "throttling".. « Reply #4 on: May 16, 2016, 05:37:31 PM »

Quote from: Rl on May 13, 2016, 07:58:48 AM

You re completely right!! Roll Eyes

KLAF altering is really needed for that change?

iirc klaf doesn't need altered.


	Logged

How to work out values from an A2L

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371

Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=

ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 31

	Re: Throttle not "throttling".. « Reply #5 on: May 19, 2016, 04:26:23 PM »

maybe but on me it worked. Now just trying to calibrate load at idle. Aprox 30% is a good start i think.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

May 12, 2024, 06:19:14 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search