NefMoto > Technical > Tuning > code "17881 - EVAP Leak Detection Pump: Open Circuit" out
Pages: 1 [2]
« previous next »
Author Topic: code "17881 - EVAP Leak Detection Pump: Open Circuit" out  (Read 16223 times)
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« Reply #15 on: May 18, 2012, 06:17:58 AM »
ESKONF is 7 bytes (7x1)

Do you have the ME7 doc?
Logged
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367
« Reply #16 on: May 21, 2012, 11:05:12 AM »
Quote from: elRey on May 18, 2012, 06:17:58 AM
ESKONF is 7 bytes (7x1)

Do you have the ME7 doc?

No i do not have the doc Sad
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #17 on: May 21, 2012, 07:11:18 PM »
Yes you do! All docs are posted at the top of this sub forum. All downloadable free of charge.
Logged
This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367
« Reply #18 on: May 23, 2012, 12:09:01 AM »
Quote from: rob.mwpropane on May 21, 2012, 07:11:18 PM
Yes you do! All docs are posted at the top of this sub forum. All downloadable free of charge.
Oh great, looking!
Logged
Matt Danger
Full Member
***

Karma: +17/-1
Offline Offline

Posts: 116
« Reply #19 on: May 26, 2012, 09:58:53 AM »
Quote from: rnagy86 on May 17, 2012, 12:57:14 AM
Sure, I would do that, but I can't seem to find that map in any of the xdf files available for the M-box, that's why I would like to know the address of the MAP so I can add it to the XDF.

Thanks

There is a G-Box XDF posted here somewhere that shares many (all?) of the M-Box addresses but is better defined. All the EVAP stuff is defined in that XDF. Either use that or copy the addresses to your M-Box XDF
Logged
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367
« Reply #20 on: May 28, 2012, 09:16:18 AM »
Quote from: Matt Danger on May 26, 2012, 09:58:53 AM
There is a G-Box XDF posted here somewhere that shares many (all?) of the M-Box addresses but is better defined. All the EVAP stuff is defined in that XDF. Either use that or copy the addresses to your M-Box XDF
Thanks i will look into that. I am currently running with CLALDPE zeroed out and it works great
Logged
nkady
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #21 on: November 09, 2017, 02:43:28 AM »
Quote from: rnagy86 on May 28, 2012, 09:16:18 AM
Thanks i will look into that. I am currently running with CLALDPE zeroed out and it works great

hy, can you help me with address of the CLALDPE map, i have the same problem.
Logged
pudeleq
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #22 on: June 30, 2018, 08:39:28 AM »
Hello, sorry for digging topic, but I need address for CLALDPE for M-box, because of DTC P1473. I want to zero it out. I'm trying with ESKONF, but it doesn't work. Thanks for help!
Logged
pudeleq
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #23 on: June 30, 2018, 08:51:13 AM »
I found it. CLALDPE is 0x10712, works perfectly
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • May 13, 2024, 12:34:29 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)