NefMoto

Hi guys I have a problem to adapt immo. Engine starts but key icon blinks on dash.

if you did immo off, it is normal that the immo led is blinking
if the keys are incapacitated
ecu pin 01571
pin dash is probably 03485

even if I put same PIN in ecu and cluster, and try adaptation it doesnt match

If your ecus immo off you wont be able to adapt immo. Need to reenable it

so you changed ecu or cluster?

changed is ecu

I changed both

Thank you for answer. I will try it and let u guys know.

ecu is immo3 and cluster is immo2  - besides immo off its your problem

do you have your ori dump from cluster before any tries of adaptation?

Its attached in first post.


I did like u said and it really didnt help. ECU can't match with cluster. However I can start key adaption now, but key icon blinks forever and it cant finish successfully.

if the old roof had immo 3, the transponder should be thrown away

the old ecu was immo2 , the new one is immo3

I think the easiest way is to go back to ori cluster file ( before any tries of adaptation imho or keys ) - and immo off ecu

In my tries never got able to adapt a cluster that was originally in a immo2 car like yours ( in spite of that they seem to be prepared for immo3 but lack something in software )

I have an idea to try adapt it manually by editing epproms , but you will need new transponders ( of course you can try on old ones)  you should send me your VIN

too much work, i will keep it like that, thank you guys for your help