NefMoto

ECU Files => ECU Definition File Requests => Topic started by: TLS on March 03, 2015, 06:25:09 PM



Title: Looking for def for 4b0906018AC
Post by: TLS on March 03, 2015, 06:25:09 PM
Seems to be similar to -AG when I compare it in TP.
Can't find a def for either.
Thanks


Edit: Added my latest attempt to first post.



Title: Re: Looking for def for 4b0906018AC
Post by: TLS on March 04, 2015, 10:13:22 PM
OK, So am trying the compare method.

TijnCUs defined AA file has some similar bits. Refer pic.
I am confused as to why my first row looks incrementally correct in the values, but the row label is whacky. Any hints?

I'm going to use the setups in Thelastleroy's 1.8T community XDF but change the map locations when I find them. Is this a reasonable way to go about it? (I realise his file is for WB and mine is NB.)

KFMIRL looks like a good start because it is so similar.
KFMIOP Y Axis looks similar but the rest is screwy.
KFLBTS Looks pretty similar.

I tried opening my .BIN in WINOLS and let it find maps but I could not locate LDRXN (and it got a bit lame not being able to save my work.)


Title: Re: Looking for def for 4b0906018AC
Post by: ddillenger on March 05, 2015, 09:32:23 AM
Stuff

The maps are offset. Look in the hex to find out how much!


Title: Re: Looking for def for 4b0906018AC
Post by: TLS on March 05, 2015, 10:40:31 PM
Cheers. I figured out how to re address it in winols and then put the numbers back into TP.
Hopefully that is one map down and I don't know how many to go.

I still could not find LDRXN/ZK.


Title: Re: Looking for def for 4b0906018AC
Post by: ddillenger on March 05, 2015, 10:53:42 PM
LDRXN 0x1D48A
LDRXNZK 0x1D4CC


Title: Re: Looking for def for 4b0906018AC
Post by: TLS on March 06, 2015, 03:35:27 AM
Thanks for that. Even though the values and everything were the same in his file and mine, I still could not find them. I was trying to use search string in winols. Could not figure out what I was doing wrong.

Well here are my results with your locations.
Appears as though my tables are the same under normal conditions and under knock. Is that usual?


Title: Re: Looking for def for 4b0906018AC
Post by: ddillenger on March 06, 2015, 10:58:05 AM
That is BARELY any boost. Presumably your car made 32hp when new.


Title: Re: Looking for def for 4b0906018AC
Post by: TLS on March 06, 2015, 02:38:13 PM
Well that makes me laugh.

I guess LDRXN PSI looks like my Desired Boost curve.



Title: Re: Looking for def for 4b0906018AC
Post by: TLS on March 07, 2015, 06:45:08 AM
Well I think I have finally made some progress.
Please refer attached .XDF

I am working from Tijn's .XDF and as I correct it for my .BIN or add tables for my .BIN I am marking them with AC - prefix.

I still can't figure out the colaxis for KFZV. Any help appreciated. Same with KFMIOP.

Trev


Title: Re: Looking for def for 4b0906018AC
Post by: TLS on March 09, 2015, 05:20:56 AM
I downloaded HxD.
Opened both Bins.
Wrote down the Data, Row and Column Addresses in Tijn's XDF. Took a screenshot of his table for whichever I was looking for and pasted into Paint.
In HxD GoTo address location. Copy the first few datapoints.
Switch to my BIN.
Paste into the search window the datapoints and let it search.
Check with F3, shift+F3 that there aren't duplicates (Duplicate row values may prove useful later.)
And when there is a match, copy down the address.
Stick that address back in Tunerpro.
Compare my new Table to Tijn's table that I saved in Paint.

Result is attached.  I also had a go at finding a few maps with prj mapfinder. Got a couple extra.

I still can't make sense of KFLBTS and KFLDIMX from Tijn's data.

Is there anything else I need for a Stage 1 tune?
I saw KFTARX mentioned but can't find it either.

Any comments welcome.
Anything Prefixed with AC - is adjusted for my Bin.

EDIT: Replaced attachment due to borked LAMFA. Should be good now.


Title: Re: Looking for def for 4b0906018AC
Post by: TLS on March 31, 2015, 05:39:31 AM
Still messing with this while I wait for my new DV to arrive.
Updated the XDF in the first post.
I ran the NLS/AL/LC routine to see if I could. It seemed to work and there was plenty of space to stick it near the end of the file. But I didn't include it as I only have FWD. It did find some more variables for me, but I have not scaled them yet.

I have used maplocator to find a few more.

KFTARX I think I have the X axis but have had no luck with the Y axis or data.
TABGBTS Can't locate it

I'm also trying to figure out the multi maps thing but just don't get it.


Title: Re: Looking for def for 4b0906018AC
Post by: adriangp14 on August 26, 2020, 10:45:52 AM
Seems to be similar to -AG when I compare it in TP.
Can't find a def for either.
Thanks


Edit: Added my latest attempt to first post.



Finalized your work , everything defined for AC all ported

now need know what maps are in that offsets

0x19501 - 19540 ??

0x19642 - 19681 ??

0x1CFD6 - 0x1D461 ??

0x1D546 - 0x1D6C3 ??

any help will be apreciated thx