|
1
on: Today at 07:18:10 AM
|
||
| Started by C5AudiGirl - Last post by prj | ||
|
I know exactly how to install my cable, thank you very much. Wow. Just because i am a woman does not make me an idiot. No one gives a damn if you're a man or a woman, what you've been posting so far has been absolute gibberish that makes no sense. https://xyproblem.info/ What are you really trying to do and on what car? What does a 4.2 gasoline car have to do with EDC17? |
||
|
2
on: Today at 07:15:49 AM
|
||
| Started by C5AudiGirl - Last post by C5AudiGirl | ||
|
Edc17 is like 2007 and up cr diesel ecus. What PRJ is asking, what does a mpi gasoline ECU (ME7) have anything to do with common rail diesel engines? The answer is: nothing. If you do not know the terminology, don't use it. Also, if your vcds and nefmoto do not work you clearly do not have the drivers installed for the cable and or the cable configured correctly. If you can't get past installing drivers you're going to have a really tough time for anything that actually involves calibration changes. Also, unless you know how to do immo off in flash nefmoto is of no use to disable the immo. I know exactly how to install my cable, thank you very much. Wow. Just because i am a woman does not make me an idiot. |
||
|
3
on: Today at 05:01:18 AM
|
||
| Started by C5AudiGirl - Last post by _nameless | ||
|
Edc17 is like 2007 and up cr diesel ecus. What PRJ is asking, what does a mpi gasoline ECU (ME7) have anything to do with common rail diesel engines? The answer is: nothing. If you do not know the terminology, don't use it. Also, if your vcds and nefmoto do not work you clearly do not have the drivers installed for the cable and or the cable configured correctly. If you can't get past installing drivers you're going to have a really tough time for anything that actually involves calibration changes. Also, unless you know how to do immo off in flash nefmoto is of no use to disable the immo.
|
||
|
4
on: Today at 03:57:45 AM
|
||
| Started by krushh - Last post by krushh | ||
|
Hi!
Does anyone have stock ecu map for 4F0910402 E / 0 281 013 610 / BOSCH EDC16CP34 Thanks! |
||
|
5
on: Yesterday at 11:26:15 PM
|
||
| Started by Gebalana ARJ - Last post by Gebalana ARJ | ||
|
Hi everybody,
I am new for this and I am here to learn as much as possible and help someone if I can..  |
||
|
6
on: Yesterday at 07:12:52 PM
|
||
| Started by fredrik_a - Last post by s60rawr | ||
|
If anybody wants to look into this file here is it https://cloud.mail.ru/public/sgtq/Gwi3tYSog MAP grad is at 0x17CB0 MAP offs is at 0x17CB2 multipliers as for DSLGRAD and DSLOFS. you're the GOAt |
||
|
7
on: Yesterday at 03:58:32 PM
|
||
| Started by C5AudiGirl - Last post by C5AudiGirl | ||
|
06 A6 4.2 is a ME7, what does EDC17 have to do with it? Well that's what I am kinda getting at.. I can not access the ecu using VCDS Lite or Nefmoto... I can access it using my matco tablet and some other software. |
||
|
8
on: Yesterday at 02:46:27 PM
|
||
| Started by Razorte - Last post by Razorte | ||
|
Hello,
Could someone please provide me with the electrical diagram of the lambda harness to ECU for these VINs? I'm trying to understand the issue with my wideband conversion, and I need to modify the harness I have because it's a US model and according to the seller, US models are not wired like EU models. Narrowband: WVWZZZ1JZ1W220173 Wideband: WVWZZZ1JZ1W320820 |
||
|
9
on: Yesterday at 02:30:14 PM
|
||
| Started by watf-iceman - Last post by watf-iceman | ||
|
Hello
I Have done a 6HP19 swap with a 2.7T and ME7.1.1 ECU From BES C5 Engine. I Have changed FMOTC, CANVERS and CWGC to the values of the donor Car (B7 S4). But i still have the Error "P0614 Incorrect Software version". What am i doing wrong? Do you guys have any Idea? |
||
|
10
on: Yesterday at 02:20:14 PM
|
||
| Started by Gilgamesh - Last post by andrei_almasan | ||
|
Hi all, my friend have a 2011 Caddy Ecofuel with 2.0 BSX CNG engine. Its stock 5spd gearbox had been swapped to 6spd GQN gearbox from 1.9tdi. So gear indicator on the dashboard is off and cruise control doesnt work. I have found damos for old sw version, found NVQUOT maps and make two files: first with simple 4 and 5 gears mod for values of 5 and 6 from original EDC16, second file with addition 6 spd instead of zero. But nothing: the gear indicator only flashing for a couple second and off. With second file 6th gear indicator began to appear. Cruise doesnt work. We simple measured the gear ratios and they approximately coincide with the average values of the ranges from the EDC16. So unfortunately I dont understand where is mistake. Can somebody advise please? Caddy ecu is 06G906022S Me7.1.1, gearbox donor is 03g906021KC EDC16. In the EDC there are reversed gear ratios named Gearbx_rVn from 1D4D2E address Did you manage to get the CC working in 6th gear? I have the same Me 7.1.1 with 06G906022S and I did the same gearbox swap. From 5 to 6 and no CC. Do you still have the flash ? Or somebody can modify my flash please? I can't find anybody in my country to modify it. I attached my flash . CC works in 6th now. Thank you! Can you help me please? |
||