Hello
Anyone have information about volkswagen online access for mileage verification by obd and which tool need to use.
Some people are using this method to restore deleted dtc with their freezframe
Like if someone delete a dtc on 25000km after that car mileage was lowered to 15000km if using this access will restore this dtc with freezframe for mileage 25000km i’am not sure if it’s really possible so if anyone know how i can pay a good money for this.
|
1
on: Today at 03:04:09 PM
|
||
| Started by 23diag - Last post by 23diag | ||
|
2
on: Today at 10:36:44 AM
|
||
| Started by ArgDub - Last post by Schumo | ||
|
Is there a chance of reading the EEprom without desoldering? CH341A Programmer + Clip + Neoprogrammer |
||
|
3
on: Today at 09:37:49 AM
|
||
| Started by ArgDub - Last post by Turbopower | ||
|
Hello,
I was working with the tool at ME7 95040 and it worked fine. Thanks! Now I tried at Bosch (Fiat, not VAG) EDC15C7 with 95P08. When initiating communication it fails (error=0x21007) or with another cable (error=0x20201). Is there a chance of reading the EEprom without desoldering? Another question: Does someone know, where CS-error is written in the EEprom 95P08 HW 0281011755 SW 379274? Thanks |
||
|
4
on: Today at 09:20:51 AM
|
||
| Started by why - Last post by EanDem | ||
|
To help you out - check Cobb of Ecutek tuning manuals for Simos 18. You missing quite few important bits. There limiters for flow, boost, chra, temperature and few safety related. Tailoring mentioned you can ask more air and deal with outcome - deviations in fuel trims for your afr target folowed by regular pain about fuelflow, impacts from port flaps, vvl and vvti.
|
||
|
5
on: Today at 05:46:21 AM
|
||
| Started by why - Last post by why | ||
|
6
on: Today at 05:45:42 AM
|
||
| Started by why - Last post by why | ||
|
It's a new ECU from ContiMental simos18 |
||
|
7
on: Today at 05:14:28 AM
|
||
| Started by beginner - Last post by Geomeo | ||
|
Why would you need a database?
|
||
|
8
on: Today at 05:05:43 AM
|
||
| Started by beginner - Last post by beginner | ||
|
hello i am trying to make a tool that can identify ecu number from a binary file
i am using c# but the only solution in my mind is building a data base with the ecu numbers that an be read from the file but this method will take long time if data base is big is there a better way to build such method ? any one ? |
||
|
9
on: Today at 02:40:44 AM
|
||
| Started by ddaniel987 - Last post by ddaniel987 | ||
|
So theres no other way via maps only ? Its my first gas mod so i don't want to jump straight to ASM
 |
||
|
10
on: Today at 02:11:24 AM
|
||
| Started by Pr3muToS - Last post by Pr3muToS | ||
|
v1.3 released
- users tab in admin interface - add or remove admin rights - show all user/userinfos - delete users - add a user account |
||