marcellus
|
|
« Reply #450 on: February 12, 2013, 12:39:59 PM »
|
|
|
I made some changes to IRL/IOP/axis to reflect the new load.
Last minute changes to the map since last night: bumped up IRL/IOP/AXIS to be higher than LDRXN
From what I saw in the brief log I was able to get, the load and boost are doing exactly what NYET said. Apparently I had my maps set too low, and not following LDRXN because of it. That is, if I am understanding it correctly.
It definitely is noticed. Before when load/boost was off, I could actually hear the turbo spool down when the ecu wasn't happy with what was going on. This morning it was a much smoother pull.
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #451 on: February 12, 2013, 12:44:07 PM »
|
|
|
This chart from the same log shows that WGDC. I need to adjust my desired boost so the PID doesn't just fall out trying to limit boost. Its a problem, but a nice problem...the turbo wants to spool faster and now.
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #452 on: February 12, 2013, 07:42:06 PM »
|
|
|
Boost after a correction to the maps. I am going to adjust LDR to keep requested around 27psi. I am thinking of also moving the 4500 rpm point in my PID to 4250 since my turbo is spooling before this point now, and I need the duty cycle to drop around there.
|
|
« Last Edit: February 12, 2013, 07:47:45 PM by marcellus »
|
Logged
|
|
|
|
marcellus
|
|
« Reply #453 on: February 13, 2013, 10:13:16 PM »
|
|
|
My best so far. This time without pushing 30psi . Thanks you guys for the pointer on dialing back the boost. I still thin the timing is low, and I still have work to do to the PID.
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #454 on: February 13, 2013, 10:16:47 PM »
|
|
|
I am still having trouble getting the boost to get to where its set and stay put. I like how the car spooled with a with it set to 29-30psi.
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #455 on: February 18, 2013, 05:40:46 PM »
|
|
|
Looking through my .bin, I have noticed that my KFLDIMX Mbar axis is 1/2 of what it should read. i dont know how it happenned.
I have been trying to properly define the axis I need so I can make the adjustments. All I do, nothing looks quite right.
|
|
« Last Edit: February 18, 2013, 05:47:18 PM by marcellus »
|
Logged
|
|
|
|
marcellus
|
|
« Reply #456 on: February 18, 2013, 05:46:14 PM »
|
|
|
what am I missing?
|
|
|
Logged
|
|
|
|
nyet
|
|
« Reply #457 on: February 18, 2013, 05:52:30 PM »
|
|
|
That mbar axis (stock) is plsolr_w (relative requested boost, basically plsol_w - ambient pressure), 0-1000mBar stock on ME7.1 so with the 5120 hack you should have 0-2000mBar range, assuming you have both plsol and pu_w scaled.. btw not sure if this is coincidence, but we're talking about it here too http://nefariousmotorsports.com/forum/index.php?topic=3280.msg33048#msg33048
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #458 on: February 18, 2013, 10:20:59 PM »
|
|
|
DUH, I totally forgot about the hack cutting things in half.
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #459 on: February 21, 2013, 10:30:18 AM »
|
|
|
After seeing my AFR's take a crap across the board again, I went back into trouble shooting hardware issues. I have been beating myself up lately with the very inconsistent fueling of the car. One log its decent to ok, next log its pig rich, next log rich-lean-rich. Come to find out my new inline fuel pump was taking a crap. Only way I found out was by replacing it and with no other changes to the tune:
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #460 on: February 21, 2013, 10:32:00 AM »
|
|
|
My fueling never really followed requested either it was too rich or too lean and did its own thing the whole way.
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #461 on: February 21, 2013, 12:41:37 PM »
|
|
|
What are you guys doing to get more timing into the motors without going methanol injection? I still cant get the timing to stay decent around 4200rpms when my turbo is fully spooled.
Should I get to a richer AFR sooner?
|
|
« Last Edit: February 21, 2013, 12:45:16 PM by marcellus »
|
Logged
|
|
|
|
Bische
|
|
« Reply #462 on: February 21, 2013, 01:16:04 PM »
|
|
|
What fuel are you running?
I would target richer mixture earlier, say 0.9 upon WOT taper to like 0.80 at full boost.
|
|
|
Logged
|
|
|
|
nyet
|
|
« Reply #463 on: February 21, 2013, 01:19:37 PM »
|
|
|
What are you guys doing to get more timing into the motors without going methanol injection? I still cant get the timing to stay decent around 4200rpms when my turbo is fully spooled.
Should I get to a richer AFR sooner?
maybe. Its gonna be tough w/o meth or lowering your CR
|
|
|
Logged
|
|
|
|
marcellus
|
|
« Reply #464 on: February 21, 2013, 01:55:30 PM »
|
|
|
What fuel are you running?
I would target richer mixture earlier, say 0.9 upon WOT taper to like 0.80 at full boost.
I am running WA state 92 OCT. I just changed my KFLAMKRL to add more fuel faster according to load:
|
|
|
Logged
|
|
|
|
|