Print Page - Topic for short questions

Title: Topic for short questions
Post by: BlackT on March 28, 2019, 11:48:06 AM

What do you think guys about this topic, one topic for all short easy to answer question.
So I will start with few questions...
Is it possible to brick ECU while reading flash?
And look this, i read ECU, mod it upload new flash everything is working. But ME7 only read 70 checksums, not 71 as on others ECUs

Is that normal?

Code:

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/3/4016.31//24G/Dst04o/080802//'
 Part Number : '4B0906018DH '
 Engine ID   : '1.8L R4/5VT    '
 SW Version  : '0004'
 HW Number   : '0261207928'
 SW Number   : '1037366497'

Step #9: Looking for rechecks ..
    <1fc6e>  0x01C000-0x01FFFF Chk: 06232F4D CalcChk: 06232F4D OK (recheck)

*** Found 70 checksums in 018DH.bin

*** DONE! 0 error(s) in 018DH.bin! ***

If you don't like this idea, you can freely erase this topic ;)

Title: Re: Topic for short questions
Post by: cessnas on March 28, 2019, 01:10:56 PM

Mine also reads 70 checksums with ME7sum. Never had an problem with that

Title: Re: Topic for short questions
Post by: aef on March 28, 2019, 01:15:38 PM

if me7check shows no errors then its okay
dont count checksums...

Title: Re: Topic for short questions
Post by: nyet on March 28, 2019, 02:35:21 PM

Quote from: BlackT on March 28, 2019, 11:48:06 AM

Is it possible to brick ECU while reading flash?

Yes. http://nefariousmotorsports.com/forum/index.php?topic=981.0title=

Quote

And look this, i read ECU, mod it upload new flash everything is working. But ME7 only read 70 checksums, not 71 as on others ECUs

Images vary.

NefMoto

Noob Zone => Noob Questions => Topic started by: BlackT on March 28, 2019, 11:48:06 AM