NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > deleting p code via xdf
Pages: [1]
« previous next »
Author Topic: deleting p code via xdf  (Read 2987 times)
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
« on: June 27, 2019, 05:06:36 PM »
have a 01 s4
currently the only code thrown is a p1519 (vag 17927) camshaft adjustment bank 1 malfunction intermittent.
just bought the car and i am going to need to get it inspected. i only want to delete this code for inspection only and then fix the cam solenoid issue.

in the mbox xdf that is from nefmoto there is the cla dtc table and the p code table. a bit confused as to what i do to delete p1519.
i know there are programs that do it automatically but i would like to know how to do it via the xdf
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
« Reply #1 on: June 28, 2019, 12:40:55 AM »
Quote from: dirtnasty on June 27, 2019, 05:06:36 PM
have a 01 s4
currently the only code thrown is a p1519 (vag 17927) camshaft adjustment bank 1 malfunction intermittent.
just bought the car and i am going to need to get it inspected. i only want to delete this code for inspection only and then fix the cam solenoid issue.

in the mbox xdf that is from nefmoto there is the cla dtc table and the p code table. a bit confused as to what i do to delete p1519.
i know there are programs that do it automatically but i would like to know how to do it via the xdf

SOLVED
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1422
« Reply #2 on: June 28, 2019, 12:54:54 AM »
How?
Logged
_nameless
Hero Member
*****

Karma: +324/-450
Online Online

Posts: 2701
« Reply #3 on: June 28, 2019, 06:10:01 AM »
Code out a few configuration bits
Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
prj
Hero Member
*****

Karma: +915/-428
Offline Offline

Posts: 5847
« Reply #4 on: June 28, 2019, 06:48:23 AM »
CDNWS
Logged
PM's will not be answered, so don't even try.
Log your car properly.
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1422
« Reply #5 on: June 28, 2019, 11:01:38 AM »
I tought it was something more complex
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
« Reply #6 on: June 29, 2019, 07:45:20 PM »
Quote from: BlackT on June 28, 2019, 11:01:38 AM
I tought it was something more complex
not at all. i am just a bit slow you could say.
just found the p code i was looking for in the manufacturer code table and p1519 was # 125. so just went to the cla dtc table and went to #125 and the value was 03. i changed it to 00. also zero'd out what prj said to be clear.
so far no codes so i think i will be good for inspection as long as i can get evap or o2 monitor to pass, just need one of the two for ny
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • May 08, 2024, 02:02:27 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.045 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)