Dev Blog
Forum
Wiki
About
NefMoto
>
Noob Zone
>
Noob Questions
(Moderator:
turboat
) >
Cloning ECU Chip to Blank Chip
Pages: [
1
]
« previous
next »
Author
Topic: Cloning ECU Chip to Blank Chip (Read 4755 times)
sadsad18
Newbie
Karma: +0/-0
Offline
Posts: 3
Cloning ECU Chip to Blank Chip
« on: November 23, 2014, 12:21:15 PM »
Hello,
I'm new to the forum so please excuse any silly questions.
I was wondering if it's possible to clone a ECU chip by reading it and burning the information onto a new, blank chip.
If so; what hardware and software would be suitable to do this?
I'm specifically interested in doing this to an 1.8t 150 AGU model ecu... so i understand the chip will need to be out of the ECU first (preferable for me).
Thanks in advance,
Your help is greatly appreciated.
Logged
turboat
Moderator
Hero Member
Karma: +45/-3
Offline
Posts: 619
Re: Cloning ECU Chip to Blank Chip
« Reply #1 on: November 23, 2014, 12:34:22 PM »
Yes it's possoble. With an AGU you will need to desolder the chip and read it in a chip reader.
Logged
sadsad18
Newbie
Karma: +0/-0
Offline
Posts: 3
Re: Cloning ECU Chip to Blank Chip
« Reply #2 on: November 23, 2014, 12:36:09 PM »
Thank you for the quick reply.
Do you have any links to where I can buy a suitable chip reader and the software needed to do it?
Once again, thank you.
Logged
ddillenger
Hero Member
Karma: +639/-21
Offline
Posts: 5640
Re: Cloning ECU Chip to Blank Chip
« Reply #3 on: November 24, 2014, 01:56:59 AM »
GQ4x with a PSOP44 adapter.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!
Email/Google chat:
DDillenger84(at)gmail(dot)com
Email>PM
redtop
Jr. Member
Karma: +5/-0
Offline
Posts: 44
Re: Cloning ECU Chip to Blank Chip
« Reply #4 on: November 24, 2014, 02:11:48 AM »
I just bought a TL866CS including several adapters for under $50 on Ebay.
Very competent tool for little money.
Logged
sadsad18
Newbie
Karma: +0/-0
Offline
Posts: 3
Re: Cloning ECU Chip to Blank Chip
« Reply #5 on: November 24, 2014, 04:16:44 AM »
Thank you. Very helpful replies. I'm guessing the chip reader should come with the software needed to read the information and to re-write it?
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
May 04, 2024, 05:30:42 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
Logged
