So as I'm starting to create a base map for my car, I decided to use the 551R Allroad box for my setup as the .ols is completely defined.

Now, everything seems to be ok except for this map, it's all over the place almost as if the offsets were wrong, but I almost cannot imagine so since like I said the .ols is completely defined and obviously still in German, and all the other maps I've looked at so far are correct.

Can anyone confirm if this is normal or not?  I'm using Tony's Stg 3 base map as a ref through TunerPro and obviously they're much different.

Screen of the 551R @ map: KFMLDMX



Screen of Tony's M-box in TP:

damn... do you have a good R box? the .kp you gave me is from you just manually correcting the file, or?

xdf define:

%%TABLE%%
   000100 Cat0ID           =0x3
   040005 Title            ="KFMLDMX"
   040010 Desc             ="ML-Schwelle f�r B_maxflr-Diagnose HFM/HLM"
   040011 DescSize         =0x2A
   040330 ZUnits           ="kg/h"
   040050 SizeInBits       =0x10
   040100 Address          =0x13D96
   040200 ZEq              =0.100000 * X,TH|0|0|0|0|
   040305 Cols             =0x9
   040320 XUnits           ="Upm"
   040352 XLabelType       =0x1
   040354 XEq              =40.000000 * X,TH|0|0|0|0|
   040505 XLabelSource     =0x1
   040600 XAddress         =0x13D8C
   040610 XDataSize        =1
   040620 XAddrStep        =1
   040650 XOutputDig       =0x1
   040300 Rows             =0x8
   040325 YUnits           ="% DK"
   040362 YLabelType       =0x1
   040364 YEq              =0.024414 * X,TH|0|0|0|0|
   040515 YLabelSource     =0x1
   040700 YAddress         =0x13D7C
   040710 YDataSize        =2
   040720 YAddrStep        =2
   040750 YOutputDig       =0x4
   040150 Flags            =0x283
%%END%%