NefMoto

Audi S4 2.7tt 99' Original file work, but the tune file dont work.

When the chip are flashed with the tune file, then theres no ignition. Startmotor turns but no engine lamp and no start.

Can anybody tell whats the problem with the file?
Thanks :-)

Best regards
Christian

Have you verified the checksum is correct?

Hey Mark

My "tuner" have done that I think..
But! the tunefile are made on another file, not the original file (ny box.bin)
but he compared it fast in winols before he flashed it.

Best regards
Dalgas

you need a new tuner.

Please do not post commercial tunes.

As he said!

Your tuner bricked your box.

Okey..
Have you guys checked the file to see that? Or is it just a reaction to what the car are doing. I know the file has to be remade, but what is it?

This is why.  You cannot flash random files; your tuner doesn't know what he's doing.

It should not be a random file, SW nr etc. are checked before flashing it.
Have you looked at the files or just doing conclusions from the text? yes/no  :-)

Thanks
Christian

i looked at the file. you need a new tuner.

Irrelevant though.  You said two comments ago that the file did not match the original read file from ECU.  If it did match; there is no need to check SW number etc. 

Not so easy on text.. :-)

No the tune file are made on the old box's file, (same numbers etc. on the box)
But he compared it in winols before flashing to be sure..

k0mpresd, what do you mean? the way to "tune" or that its the wrong file?

You are being told politely that the software is horseshit and the person who made it should have their fingers chopped off.

There, spelled it out for you.

Fingers chopped off! hahahah

Hahaha