|
Title: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) Post by: Fabioo on June 28, 2022, 12:10:16 PM Hello, trying to adapt MAF and Injectors from BAM engine into AUQ (06A906032HN).
Copied maps MLHFM/KFKHFM/FKKVS/TVUB from Audi S3 8N0906018BH 362999. FPR is 3bar i can see on it. Not sure about KRKTE because when i put value from S3 (0,08358) Lambda goes rich like -20%. Title: Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) Post by: denniss112 on June 28, 2022, 03:16:15 PM Logs or it didnt happen.
Title: Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) Post by: aef on June 28, 2022, 11:16:38 PM missing krkte ???
Title: Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) Post by: Fabioo on June 30, 2022, 07:03:35 AM Ok so maps i copied correctly, i also did copy KRKTE from S3 but it was overfueling alot. I am going to do another tests today, should i clear adaptations ot anything after i changed MAF & Injectors ?
Title: Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) Post by: nyet on June 30, 2022, 11:22:54 AM MLOFS? logs.
Title: Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) Post by: tao13 on June 30, 2022, 11:04:41 PM Fkkvs has other axis in AUQ, but is not so important and i think is not a cause for your -20% adaption.
See KFLF too. Title: Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) Post by: Fabioo on July 01, 2022, 04:05:01 AM Yesterday re-checked whole setup and found out that MAF housing is from r32 ... no idea about Maf socket, aftermarket MAFs... I think i will adapt stock maf to bigger housing, there was app for that, already used it
|