|
Title: ME7.5 1.8t pinout <-> CPU pin mapping Post by: thenextdon13 on October 27, 2009, 11:24:22 PM Folks,
It is now nearly complete, there are a couple of sensors that I cannot trace properly, and a few chips I cannot find datasheets for, but here are the notes listing i have made for the me7.5 1.8t ECU from an A4 1.8t quattro. Most noteably at this point i cannot trace the RPM sensor accurately and there is not a pin called out on the wiring diagram in the Bentley manual for the recirculation valve. http://spreadsheets.google.com/ccc?key=0Atc5QQQNw_5ndHV3aGNua1NXdnh5N3lEQlUyS0J4V0E&hl=en May be a while before i start decompiling the software, as i have to get a bin file from the ECU and my car is currently in many pieces.. (fusebox) I will be trying to track all future work at the following wiki: http://nefmoto.com/wiki/index.php?title=Reverse_Engineering_ME7.5 take care Camden Title: Re: ME7.5 1.8t pinout <-> CPU pin mapping Post by: Tony@NefMoto on October 28, 2009, 01:05:17 PM Looking good Camden.
Did the pin out info I gave you for the ME7.1 help at all? Title: Re: ME7.5 1.8t pinout <-> CPU pin mapping Post by: RaraK on December 10, 2009, 12:43:22 PM which 1.8t bin would you like? i have an HS(2002 VW) and ....one from an 04 A4
|