|
Title: immo off on 06A906019AK Post by: h100vw on January 30, 2017, 12:58:38 AM Hey, information on these seems pretty thin on the ground. :-X
Can any of you guys in the know, help me out? I have seen off'd eeproms, off'd AM29AF200 bin, K lines being cut. Not sure where to go next. I read the eeprom as that was easy to do. 93c56 read with 8 bit (that's another random factor?) Thanks in advance Title: Re: immo off on 06A906019AK Post by: _nameless on January 30, 2017, 04:10:51 AM just playing about give it a shot
Title: Re: immo off on 06A906019AK Post by: h100vw on January 30, 2017, 03:32:20 PM Thanks Marty. :)
On a scale of 1-10 what's the odds of it working as a percentage? ;D I'll try it tonight and post back. Title: Re: immo off on 06A906019AK Post by: h100vw on January 31, 2017, 01:40:37 AM 2 hours in and i can't write anything to the eeprom.
GQ-3X latest software. the eeprom will fill with FF and read back. Fails the verify everytime at the first address, even trying to flash the original read. In the device list there's 8 and 16bit versions of the chip. I am trying to use the same device as the one I took the read with, 8bit This is using a socket in the programmer not a clip. Anyone have any ideas for me? TIA Title: Re: immo off on 06A906019AK Post by: h100vw on February 03, 2017, 12:56:37 AM Bought new chip, wrote first time with original read file. Going to try and see that the car starts before proceeding further.
Title: Re: immo off on 06A906019AK Post by: h100vw on February 09, 2017, 06:39:12 PM Car has hardware fault and the immo trips, looks like the reader coil is fubar.
This is with the original data restored to a new chip. I am thinking I damaged the first one removing it from the board. |