Pages: 1 [2]
Author Topic: Removing DTC for CAM/CRANK sensors.  (Read 6920 times)
prj
Hero Member
*****

Karma: +917/-428
Online Online

Posts: 5855


« Reply #15 on: August 29, 2018, 10:34:02 PM »

If you have a sensor correlation error the only reason for this is either the cam chain or the timing belt installed incorrectly.
End of story.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.053 seconds with 16 queries. (Pretty URLs adds 0.003s, 0q)