Pages: [1]
Author Topic: Requested Boost Help  (Read 1810 times)
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« on: February 27, 2021, 01:41:32 AM »

Cant seem to change this to get rid of a strange dip in my requested boost (see attached logs). Ive tried numerous changes of IRL/IOP and still the same. It seems to be happening where VVT occurs, on reading the wiki the following maps have an impact KFPBRK & KFPBRKNW. Am i barking up the wrong tree or can anyone point me in the right direction.

Thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12235


WWW
« Reply #1 on: February 27, 2021, 01:53:10 AM »

The entire load -> req boost path is described in the S4wiki.

not sure what you are asking.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12235


WWW
« Reply #2 on: February 27, 2021, 02:00:03 AM »

You can either flatten the vvt corrections or use hbn to limit boost, which will back calculate req load (with reversed vvt corrections) so that the load->boost conversion cancels them out.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)