Pages: [1]
Author Topic: S4 4.2 partial mappack  (Read 8148 times)
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« on: November 14, 2014, 07:52:26 PM »

Tinkering on this with some rum and Dr Pepper...  If anythings way off I'll fix it later.

this should go with the file in ORI section.  

I'm pretty certain about the lamfa, kflf, and kflbts.  KFZWs I think are good (or close?).

-Also KFMIRL/KFMIOP and KFSU/2

updated 1-21-15
« Last Edit: January 21, 2015, 02:04:53 PM by smelly240 » Logged
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« Reply #1 on: November 16, 2014, 04:38:50 PM »

updated slightly.

ORI
http://nefariousmotorsports.com/forum/index.php?topic=7247.0title=


MAF Scale is not correct.
« Last Edit: November 16, 2014, 07:37:09 PM by smelly240 » Logged
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« Reply #2 on: January 09, 2015, 07:43:11 PM »

Updated with KFNWSE...

« Last Edit: January 14, 2015, 10:57:06 AM by smelly240 » Logged
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« Reply #3 on: January 21, 2015, 02:04:24 PM »

can anyone check if i have the stuff in my NMAX STUFF folder in this mappack correct?   Im not so sure of it.
Logged
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« Reply #4 on: February 07, 2015, 08:20:20 PM »

ORI
Logged
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« Reply #5 on: March 17, 2015, 05:58:21 PM »

anyone want to lend a hand for MSLUB and MSLBAS ?  I want to block off my combi valves.
Logged
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #6 on: March 17, 2015, 06:53:46 PM »

MSLUB @ 0x1B4BC

MSLBAS maybe @ 0x18A18, probably not though.
Logged
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« Reply #7 on: March 18, 2015, 07:52:48 AM »

Thanks for chipping away at this a bit Smiley

I was looking in that area - the values for that are a lot lower than on other cars - and there isnt really anything directly comparable (closest i have is a 6 cylinder that is kinda similar).
Logged
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« Reply #8 on: April 30, 2015, 04:10:00 AM »

CWKONABG 181ba
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)