Title: try to immo defeat old me7 with siemens cpu Post by: jogtx16v on September 04, 2019, 06:15:36 PM there is a easiest way to immo defeat old bosch me7 with siemens cpu ? I'm sure argdubstool will only work on infinition c167 cpu.
do I need to desolder 95040 and chip burner it ? or someone have a bootmode tool for it ? Title: Re: try to immo defeat old me7 with siemens cpu Post by: jogtx16v on September 11, 2019, 06:01:16 PM TTT
Title: Re: try to immo defeat old me7 with siemens cpu Post by: adam- on September 12, 2019, 03:50:14 AM Have you tried to bootmode it?
Title: Re: try to immo defeat old me7 with siemens cpu Post by: BlackT on September 15, 2019, 09:25:22 AM Yust read it via boot mode. Tool you have here on forum me7eeprom
Title: Re: try to immo defeat old me7 with siemens cpu Post by: jogtx16v on October 17, 2019, 06:23:59 PM this ecu is 06A 906 032 C
a friend give me that ecu to make immo delete but seem already immo off. I Also discovered this ecu have neuspeed sticker on 29F400BB chip. the car no start with this ecu. I successfully Read eeprom with willem programmer. I notice in this file I have some checksum issue but no deathcode are active. thank for helping me Title: Re: try to immo defeat old me7 with siemens cpu Post by: jogtx16v on October 18, 2019, 04:25:27 PM eeprom in attachement
|