|
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: pyronixes on August 29, 2016, 01:48:11 PM Why do my graphs and whatnot not look like any of yours ? My AFR table doesn't show RPMs, it just says 5120 and 0 ? And the boost table all weird as well ?
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: vwaudiguy on August 29, 2016, 02:02:35 PM Why do my graphs and whatnot not look like any of yours ? My AFR table doesn't show RPMs, it just says 5120 and 0 ? And the boost table all weird as well ? Because the addresses of the map table and the axis are wrong. Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: pyronixes on August 29, 2016, 02:16:30 PM Well thanks for the quick reply.. But why does it seem I'm the only one? And how does one fix it ?
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: FlyboyS4 on August 29, 2016, 02:25:58 PM What's the car setup you are pulling your STOCK.bin from?
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: pyronixes on August 29, 2016, 03:13:35 PM Its a 2002 A6. Its because its not an S4 huh ?
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: FlyboyS4 on August 29, 2016, 03:53:07 PM Its a 2002 A6. Its because its not an S4 huh ? Yes, you're using the XDF for an S4 with an A6 bin. You'll need the XDF for your car. Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: pyronixes on August 31, 2016, 05:01:32 AM So I have a 4B0907551AL. I can flash over it with the S4 8D0907551L bin, use the 551M xdf and begin from there yes ?
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: Carsinc on August 31, 2016, 06:21:25 AM Aslong as your current ecu is me7.1 not 7.1.1 then yes.
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: nyet on August 31, 2016, 11:04:00 AM Aslong as your current ecu is me7.1 not 7.1.1 then yes. 4B0907551AL is definitely APB ME7.1 AFAIK. Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: Carsinc on August 31, 2016, 11:21:37 AM I dont know the 2.7 number that well and did not feel like looking :( i'm lazy yes.
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: pyronixes on September 02, 2016, 04:03:38 PM Okay, I understand all this now, the bin, xdf, checksums etc. Thank you all for the help. Now, before I write a new bin, Ive got to use vcds, go into 01 - engine, and recode to get the 5 digit pin. Then, after the flash just recode the same pin ? My biggest fear I guess is having it not start afterwards. :/
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: nyet on September 02, 2016, 04:42:31 PM If you use an S4 file you don't have to worry about immo. There is none.
Title: Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) Post by: Lost on September 03, 2016, 12:17:36 AM So I have a 4B0907551AL. I can flash over it with the S4 8D0907551L bin, use the 551M xdf and begin from there yes ? Yes You can use 4B0907551AL and flash over with M or L file. |