Help finding a few code words (and verifying a couple)

Pages: [1]

« previous next »

Author

Topic: Help finding a few code words (and verifying a couple) - 06A906032DL (Read 5255 times)

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Help finding a few code words (and verifying a couple) - 06A906032DL « on: October 22, 2013, 06:20:29 AM »

I'm following the wiki steps for rear O2 removal (i think pulled from phila_dot's findings). I found 2 of the codewords that were not in the XDF i'm using (which is a very complete xdf for 06a906032DR). the rest, i'm not sure if they apply to 1.8t or not? I'm using the HN map pack as a reference and just looking for patters/values that match up. Could you possibly verify the 2 i found and maybe give me some guidance on the rest?

Found:
CWDLSAHK - 0x186F7 val: 9 (i think this should be changed to 0)
CWKONLS - 0x181BB val: 3 (i think this should be changed to 1 for 1.8t)

Can't find (don't have any reference map pack for 1.8t that has these): CDLSHV, CLRHK, CLRKA


	Logged

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Help finding a few code words (and verifying a couple) - 06A906032DL « Reply #1 on: October 26, 2013, 02:51:19 PM »

ok so i made some progress--- i think.... if anyone could possible verify this i'd greatly appreciate it. I haven't actually tested any of these yet.

CDLSHV - 181AC - set to 0

CLRHK doesn't exist i think? I think its instead CLRSHK on this ecu? i may be totally wrong on thta. Value was 16. I will change to odd value of 0. THis could be totally wrong, idk.

CLRKA also doesn't exist. i guess it's because this is a wideband car? instead, its CLRSKA at 19E5B -- set to 0 from 1


	Logged

ddillenger

Hero Member

Karma: +639/-21
Offline

Offline

Posts: 5640

	Re: Help finding a few code words (and verifying a couple) - 06A906032DL « Reply #2 on: October 26, 2013, 03:01:37 PM »

CLRSHK=17.

What are you doing with CDLSHV?


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Help finding a few code words (and verifying a couple) - 06A906032DL « Reply #3 on: October 27, 2013, 07:33:14 PM »

Quote from: ddillenger on October 26, 2013, 03:01:37 PM

CLRSHK=17.

What are you doing with CDLSHV?

I think I actually did set CLRSHK to 17 (typo in my last reply) but I'll double check.

As for CDLSHV, I set it to 0 per the recommendations of the wiki. Is that not correct?

Thanks again for all the help on this!


	Logged

ddillenger

Hero Member

Karma: +639/-21
Offline

Offline

Posts: 5640

	Re: Help finding a few code words (and verifying a couple) - 06A906032DL « Reply #4 on: October 27, 2013, 08:53:10 PM »

Quote from: oldcarguy85 on October 27, 2013, 07:33:14 PM

CDLSHV=Lambda sensor interchange recognition.

You have a 4 cylinder, only 1 lambda sensor, so there is no 2nd lambda to interchange, thus no use for CDLSHV.


	Logged

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Help finding a few code words (and verifying a couple) - 06A906032DL « Reply #5 on: October 27, 2013, 09:20:35 PM »

Makes perfect sense. Thanks again!!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

May 21, 2024, 03:53:32 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search