Pages: 1 [2]
Author Topic: 1.8T GLI flashing?  (Read 16305 times)
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #15 on: March 04, 2012, 09:22:50 AM »

So... I've been able to flash the ECU using NefMoto ver 1.8.00...

I can only do a full flash and it still cannot do a memory verification...  but even after doing successful OBD flashes I still get the code Control Module Programming Not Finished...

any ideas?
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #16 on: March 06, 2012, 06:31:33 AM »

So... I've been able to flash the ECU using NefMoto ver 1.8.00...

I can only do a full flash and it still cannot do a memory verification...  but even after doing successful OBD flashes I still get the code Control Module Programming Not Finished...

any ideas?
First, update to the new Nefmoto SW. Second, just reflash again with the same file. Turn ignition off, wait 10 secs and it should go away.
Logged
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #17 on: June 11, 2012, 09:50:33 PM »

5sp file can be sorted to work just fine on 6sp.
most wont go through the trouble to sort it
Of course it can. Nobody said you weren't able to.
Its much easier to just use the appropriate software version and then just port the tune to its 5spd or automatic counterpart, though. At least for me. We all have different ways of doing things, I guess.
Logged
sloweuro
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #18 on: June 18, 2012, 09:31:17 PM »

Any update on this, did the new NefMoto Flasher version help?
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)