|
Title: Pops & Bangs when stepping on the clutch in MED 9.1 Post by: Albertoak on December 04, 2020, 07:59:20 AM Hi.
After reviewing the FR of med 9.1 many times and doing different tests ... I am not able to get it to inject petrol X seconds of FTVSA when the clutch is depressed (gear change). If I use: KFNWEGM injects yes or yes below the RPM that I put in the table. Whether the clutch is depressed or not. But the idea is to be able to inject X time when stepping on the clutch between gear changes. I think there must be some byte that disables this injection for seconds in the clutch pedal management module in the flash. but I can't find him ... Any ideas?? Ecu med 9.1 5K0907115K thanks!!! Title: Re: Pops & Bangs when stepping on the clutch in MED 9.1 Post by: d1scussi0n on December 04, 2020, 08:52:25 AM Search for CWSAWE.
Title: Re: Re: Pops & Bangs when stepping on the clutch in MED 9.1 Post by: xXxCryxXx on December 04, 2020, 08:53:31 AM Search for CWSAWE. thats only for permanent solution CWSAWEX-Boost Performance Title: Re: Pops & Bangs when stepping on the clutch in MED 9.1 Post by: Albertoak on December 04, 2020, 01:17:26 PM Yes, of course. CWSAWE always at 01. But not even with those ...
Title: Re: Pops & Bangs when stepping on the clutch in MED 9.1 Post by: Albertoak on December 07, 2020, 11:52:12 PM solved. it was a filter byte from b_kuppl. I already have pops when changing gear following kftvsa :)
|