Hello guys, i come from Germany and i´m reading in this Forum for a while - It´s great here!
My english isn´t very well, i´ll hope you can understand me...
I read the Login Code from my ME7 ECU with the tool from this site, works perfect.
Now i bought a new cluster for my Audi A3 1.8t Engine because the original Cluster is broken and have the half display only, the new cluster has the big "FIS" Display. Both Cluster are Immobilizer 3.
I wann put the Engine in my Polo 6N. It runs but turns off after 3 seconds (immobilizer)
At first:
I tried to read the Login Code from it to match the immobilizer to my ECU.
The program i used (VAG Tacho) is unable to read the code.
I don´t want to disable the immobilizer.
At Second:
I wanna match the Mileage to the Mileage from the original cluster of the Engine.
VAG Tacho says i should put my battery off for 2 minutes the the Mileage is the new. This don´t work
I´ve 2 files attached, one from the Memory Buffer File from VAG Tacho for the Login Code, the second is for the Mileage?!
If someone needs another Files please help me whic program i should use to read the necessary data.
I hope that you can help me.
So soon,
Florian