Pages: 1 [2]
Author Topic: Bosch MG1 (bmw) and can bus  (Read 7365 times)
MegaZu
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 10


« Reply #15 on: September 20, 2022, 10:14:37 AM »

You are super arrogant, what I noticed is that you like to say here something like "bla bla bla you don't know even what is SBOOT, CBOOT, ASW bla bla" ... slow down because your chair will blow
Logged
prj
Hero Member
*****

Karma: +916/-428
Offline Offline

Posts: 5854


« Reply #16 on: September 20, 2022, 10:15:40 AM »

You are super arrogant, what I noticed is that you like to say here something like "bla bla bla you don't know even what is SBOOT, CBOOT, ASW bla bla" ... slow down because your chair will blow
But you don't. You do not understand the structure of the ECU, it is clear to anyone that does.

So, more hot air?
Logged

PM's will not be answered, so don't even try.
Log your car properly.
MegaZu
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 10


« Reply #17 on: September 20, 2022, 10:20:52 AM »

"hot air" comes only from you. Pick the medal from box for the most clever person in the universe who knows what SBOOT is Smiley
PS. Why you are still here ? Trying to assert yourself ?
Logged
prj
Hero Member
*****

Karma: +916/-428
Offline Offline

Posts: 5854


« Reply #18 on: September 20, 2022, 10:23:30 AM »

"hot air" comes only from you. Pick the medal from box for the most clever person in the universe who knows what SBOOT is Smiley
PS. Why you are still here ? Trying to assert yourself ?
I am here as long or as little as I want to be.
But you're just a passing phenomenon, like many before and after.

Your level of intelligence can be summed up with one picture:


Cheesy

BTW your MSD81 also has SBOOT, CBOOT and ASW.
Just like any other ECU in existence.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #19 on: November 06, 2022, 06:58:33 AM »

Flashing over CAN is supported only on bench in SBOOT.

Are you sure it goes over CAN? I tried to sniff so called bench mode without any luck. I'm not talking about BMW but in general about all Bosch ECUs.
Have you sniffed it? I will be grateful for a short guide. Because I tried any speed settings and nothing. Could it be ASC?
Logged
prj
Hero Member
*****

Karma: +916/-428
Offline Offline

Posts: 5854


« Reply #20 on: November 06, 2022, 07:50:17 AM »

It's done over the CAN transceiver. Whether it's CAN or some other protocol it's a different story.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
sharmzy519
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #21 on: May 06, 2024, 02:27:58 AM »

So who has any progress outside femto, also anyone play with DAP over CAN Physical Layer (DXCPL) Converter function, i realize its being a debug password/key for PRJ looking to call it a stupid idea.
« Last Edit: May 06, 2024, 02:42:58 AM by sharmzy519 » Logged
prj
Hero Member
*****

Karma: +916/-428
Offline Offline

Posts: 5854


« Reply #22 on: May 06, 2024, 03:28:10 AM »

So who has any progress outside femto, also anyone play with DAP over CAN Physical Layer (DXCPL) Converter function, i realize its being a debug password/key for PRJ looking to call it a stupid idea.
What is discussed here has nothing to do with femto.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
sharmzy519
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #23 on: May 06, 2024, 03:37:56 AM »

I realize there method isn't this, but unless you have been welcomed you into the office and showed there process, you couldn't say forsure. I do realize that companies solution is something else all together (edited for monetary reasons) but i expect you all will have a smoother solution soon.
« Last Edit: May 06, 2024, 03:36:34 PM by sharmzy519 » Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)