Recent Posts

I guess Ill bite. You are not providing enough info for anyone to help you. Also, what you wrote does not make any sense.

Sorry, looking back on what I said does not make sense and I did not provide any real context. Let me try to make more sense.

I have an ME7.1.1 ecu and I was trying to flash a S4 firmware to it and I went into vagcom it no longer had a HW number, no dtc's at all. I flashed it back to the A6 bin i backed up and still the same issue. I assume you can not just flash firmwares like that they probally have to match the hardware inside the ecu. I am just trying to get it back to a working state as the way it came. If any more info is needed please let me know and I will provide.

I Found Your topic about P1340 DTC delete. Maybe this is the best advice, If we can not change Cam Rotor Counter in the software.

Post by: aef on April 10, 2015, 10:17:22 AM
I am trying to find and delete DTC Location in my 360314 S3 8L Wideband file.

This is my DTC: http://wiki.ross-tech.com/wiki/index.php/17748/P1340/004928

So we are talking about 1340

Today I tested the car - runs no problem, engine sound good and etc.

Hello started to learn a little bit of programing. I have pulled original software from ecu and i dont know if i found right xdf file or not. Maybe someone could look and point me to the right direction.

I am trying to fix my 06 audi a6 4.2 ecu 4F0910560. I am trying to flash it and now it does not have a HW version. Any help?

I guess Ill bite. You are not providing enough info for anyone to help you. Also, what you wrote does not make any sense.

Tested problems with Wideband AUM:
06A906032HJ
0261207436
362287

And problems Wideband BAM:
8N0906018H
0261206795
360313

Has the same problem "17748 - Cam and crank sensor - P1340 - 35-00 - Incor. Correlation"

And no problems With Seat Ibiza's Narrowband ECU:
6K0906032 
0261206023
352176

I am trying to fix my 06 audi a6 4.2 ecu 4F0910560. I am trying to flash it and now it does not have a HW version. Any help?

There's damos floating around for this stuff on the web and it's an EDC15 so even without one it's trivial.

Did you even try?
78844 IQL, 78B18 SL, 77CAE boost setpoint, 77AD4 boost pATM limit, 77AD0 SVBL, 7A820 SVBL, SOI stuff starts at 7316A, Rail stuff at 79BE2...

Just as a follow up, this was not abandoned, couple of things changed though in the meantime. ME97 broke (typical on MB because of high temp), fixed it as it was bad drivers. Returned it to stock as I want to do some maintenance on the engine before pushing it further. Also decided to get a dyno as recommended by prj before, so preparing a proper place to tune like it has to be done, will take me a few months though to prepare the whole setup (2 or 3 months at least).
Meanwhile I got my reverse engineering skills really polished, had a few trainings to be honest with reputable people, unlocked me immediately in lots of things I was missing, strategies and so on, learned a lot more on how to use A2L to reverse engineer and so on, so investing time there, mainly on doing a multimap for ME97 so I can have stock and tuned params/maps during my testing periods, honestly, while not really invested time in tuning perse I really went forward with stuff I was more interested on like reverse engineering

Hello guys, you are my only hope now!
I got a new car an Alfa romeo 2.4jtd 150CV with edc15c7 ECU.

for VW EDC15 Ecus there is VAGEDCSUITE but i cant seem to find any maps on this file.

Car had a bad tune, flashed ori and now i miss my power

Can someone Please help me?

Attached Ori file

I searched Complete net, got on Polish and Russian Sites for a Mappack.

I can find EGR and Duration map but thats it!

why does your vcds not recognise any label file? is the software number changed?

normally you would see the offset in 93 block 3

which ecu hardware and software?