|
Title: 1.8t multimap here Post by: fknbrkn on July 24, 2021, 07:47:02 AM Just my 2c back to nefmoto
This is multimap routine ive made 7yrs ago for ldrxn / zk and kfzw/2 switching with clutch and cruise stalk Indicates with tacho needle So you should hold the clutch and then tap set btn. On first tap it shows current selected map on tacho and after 1s returns to nmot if not pressed again. If pressed again it loops through maps_qt on every tap Could be switched anytime even on wot :o Not used eeprom so returns to 1st set when ecu lost power Xdf included Maps_qt: num of sets in range of 1-4 Stock ldrxn/kfzw maps ignored Bugs: clutch indicates warning of low oil pressure when engine is off or idling (on some engines) and tacho shows selected map with 2000+ rpm due to no oild pressure :) Do not blindly flash included file. Its not checksummed and ldrxn / kfzw values are definetely not for a stock engine. Only for education purpose Good luck! Title: Re: 1.8t multimap here Post by: 1k.remap on July 26, 2021, 11:11:38 AM Hello
I wanted to check your files, but i've got xdf error, fgt2 dll missing, windows vista and above detected, and tunerpro just crashes. Is there a way to open your xdf? Thx in adv Title: Re: 1.8t multimap here Post by: rogerius on July 27, 2021, 04:37:47 AM Thanks for sharing, it is very educational, shows how same things can be achieved differently. Applaud!
Title: Re: 1.8t multimap here Post by: Sandstorm3k on July 30, 2021, 10:26:56 AM Cool stuff, thanks for sharing!
Title: Re: 1.8t multimap here Post by: bamofo on August 03, 2021, 10:46:56 AM Just my 2c back to nefmoto This is multimap routine ive made 7yrs ago for ldrxn / zk and kfzw/2 switching with clutch and cruise stalk Indicates with tacho needle So you should hold the clutch and then tap set btn. On first tap it shows current selected map on tacho and after 1s returns to nmot if not pressed again. If pressed again it loops through maps_qt on every tap Could be switched anytime even on wot :o Not used eeprom so returns to 1st set when ecu lost power Xdf included Maps_qt: num of sets in range of 1-4 Stock ldrxn/kfzw maps ignored Bugs: clutch indicates warning of low oil pressure when engine is off or idling (on some engines) and tacho shows selected map with 2000+ rpm due to no oild pressure :) Do not blindly flash included file. Its not checksummed and ldrxn / kfzw values are definetely not for a stock engine. Only for education purpose Good luck! Thanks for sharing your work. I dont work on this platform but am always interested in learning more about how to do these things. Title: Re: 1.8t multimap here Post by: totti on September 10, 2021, 10:31:38 AM Just my 2c back to nefmoto This is multimap routine ive made 7yrs ago for ldrxn / zk and kfzw/2 switching with clutch and cruise stalk Indicates with tacho needle So you should hold the clutch and then tap set btn. On first tap it shows current selected map on tacho and after 1s returns to nmot if not pressed again. If pressed again it loops through maps_qt on every tap Could be switched anytime even on wot :o Not used eeprom so returns to 1st set when ecu lost power Xdf included Maps_qt: num of sets in range of 1-4 Stock ldrxn/kfzw maps ignored Bugs: clutch indicates warning of low oil pressure when engine is off or idling (on some engines) and tacho shows selected map with 2000+ rpm due to no oild pressure :) Do not blindly flash included file. Its not checksummed and ldrxn / kfzw values are definetely not for a stock engine. Only for education purpose Good luck! Thanks for sharing it. Can you tell how does it work? I could see functions at 8B4D00 8B4000 8B4700. Maps are stored from 8B5000. 8B4D00 seems to show the current map on odo with changing nmot. I could not find how to change map from 8B5000 to the ram. Thank you Title: Re: 1.8t multimap here Post by: SAMI974 on June 03, 2022, 02:14:58 AM thank you ;)
Title: Re: 1.8t multimap here Post by: LoursRose on September 20, 2022, 08:47:38 AM is it possible to integrate KRKTE?
Title: Re: 1.8t multimap here Post by: prj on September 20, 2022, 09:05:58 AM is it possible to integrate KRKTE? Of course it is.It's even possible to make ME7 control coffee machine. Is it possible for you? Probably not if you need to ask. Title: Re: 1.8t multimap here Post by: fknbrkn on September 24, 2022, 02:41:15 AM Krkte and kftsrl was implemented aswell for mr LoursRose
For those who want some modifications of the code - ask me in pm. DSG multimap based on selected dsg mode also completed. Pm for details. Not a free service. Title: Re: 1.8t multimap here Post by: agron25 on May 20, 2023, 01:08:08 AM hello
does this file work with ME7.5 audi S3 1.8T BAM? THANKS Title: Re: 1.8t multimap here Post by: pinokio1979 on May 24, 2023, 01:38:17 PM Hello, I've been playing this hobby for 2 years, I don't understand everything, language problems, translations, etc. I'm weak in computer science, but I understand engines well. I'm thinking about making a multimap because my son has a driving license and I'm afraid to borrow a car. I modified the car and tuned it to about 240 hp. I remember myself 25 years ago when I was driving a 55 hp car. The thing is, I'm using tunerpro and I can't find a bin that matches your bin. I've tried different bin files that I can't seem to match, even files with a different ID number. I guess I should switch to wineols and watch the 2D data viewer. Or maybe as a courtesy you can upload a bin file that matches. Greetings from Poland.
Title: Re: 1.8t multimap here Post by: fknbrkn on May 24, 2023, 11:23:16 PM 06A906032HJ 0002 stock and definitions available here at nef
Title: Re: 1.8t multimap here Post by: drugward on January 03, 2024, 03:14:06 AM Hello,
I’ve PM’d you a while ago, could you please reply? Thanks, Title: Re: 1.8t multimap here Post by: Kh_Yurii on January 27, 2024, 11:19:30 AM Krkte and kftsrl was implemented aswell for mr LoursRose For those who want some modifications of the code - ask me in pm. DSG multimap based on selected dsg mode also completed. Pm for details. Not a free service. please look at the PM Title: Re: 1.8t multimap here Post by: agron25 on March 16, 2024, 12:55:29 PM who could sell me at a good price the 1.8T multimap xdf+bin file for S3 8l bam 225cv?
thanks |