Pages: [1]
Author Topic: HPFP AMS in CLA 45 AMG Tune help  (Read 2439 times)
javigsi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 37


« on: August 17, 2021, 12:16:28 AM »

hi guys !I am  tune the ecu of a MB CLA 45 AMG from a customer who has bought an AMS HPFP and we are not getting it to work properly. I can't get adequate fuel pressure. Could you help me ? .

thanks in advance
Logged
prj
Hero Member
*****

Karma: +920/-429
Offline Offline

Posts: 5862


« Reply #1 on: August 17, 2021, 03:00:07 AM »

How about some logs?

Use my logger, if you don't already have something:
https://docs.vehical.net/logger_getting_started
Logged

PM's will not be answered, so don't even try.
Log your car properly.
javigsi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 37


« Reply #2 on: August 17, 2021, 04:08:13 AM »

ok . later posted logs , but in idle pressure /  set point  is 10bar /  actual 0.8bar .
Logged
prj
Hero Member
*****

Karma: +920/-429
Offline Offline

Posts: 5862


« Reply #3 on: August 17, 2021, 04:26:34 AM »

That's most likely not a problem with control, but a hardware problem, if it does that with a stock file.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
javigsi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 37


« Reply #4 on: August 17, 2021, 04:31:35 AM »

That's what I was thinking, at least it should reach 10 bar, right? I'm going to check our installation
Logged
prj
Hero Member
*****

Karma: +920/-429
Offline Offline

Posts: 5862


« Reply #5 on: August 17, 2021, 04:54:24 AM »

Yes, I think so. Usually with a HPFP upgrade it will always produce more pressure not less, but at idle even if you do not change anything it should make target.
Check that the low fuel pressure is correct as well.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
teobolo
Full Member
***

Karma: +24/-6
Offline Offline

Posts: 112


« Reply #6 on: August 24, 2021, 08:07:58 AM »

Hi, it needs completely new calibration of hpfp and lot maps need to be changed otherwise it not work .2 year ago i use it in a hi hp A45 AMG and AMS charge 200usd for sent as calibration for it .
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 18 queries. (Pretty URLs adds 0s, 0q)