1
on: Today at 12:44:30 PM
|
||
Started by SamoZlo - Last post by Audiquattro44 | ||
Test this
|
2
ECU Files / ECU Definition File Requests / Re: 0281010741 Alfa 2.4 JTD 150 CV EDC15C7 Mappack or Help needed.
on: Today at 10:43:16 AM
|
||
Started by Steven97i1 - Last post by prj | ||
Every Damos or mappack says after importing Adress 00000 So sadly i cant just pin point some of the maps You're not supposed to import a random non matching damos into your binary. Instead you should use compare mode... At this point you're having issues with basic computer / OLS knowledge. You're gonna have to get through that if you want to get anywhere with this. Nobody is going to hold your hand. If it's too difficult then pay someone for a file. |
3
on: Today at 10:25:50 AM
|
||
Started by s5fourdoor - Last post by TeknoFi | ||
i'm about to buy either those 530, or 630. Are the 630 worth the extra 100€ for them?
0280158117 (530cc, 6-hole spray, 15deg) ~200€/set 0280158298 (630cc, 16-hole spray, 20deg) ~300€/set because they are short nozzle injectors I might lean towards the cheaper one with a slightly smaller angle, to prevent wall wetting as much as possible. Anyone have thoughts? |
4
on: Today at 10:20:22 AM
|
||
Started by SamoZlo - Last post by Spen Holder | ||
just flash a manual fine and done, nothing more
|
5
on: Today at 10:13:40 AM
|
||
Started by fredrik_a - Last post by V70user | ||
20FWHJ is very old software. You shouldn't touch ESKONF to disabl rear lambda. You should disable CDHSH, CDLSH and CDLASH. After Your answer I have a mess...How can I found CDHSH, CDLSH and CDLASH? Any hint...? I got only WinOLS, do I need some other sotware to modify/view a bin file? And this software hasn't 2d maps for fan mode. This software has some variables for different fan speeds. P80 A2L has these variables for fan. So you can find these variables by finding same maps in your software. ok, but where to start? I have searched similar values You posted but no results. Maybe Im asking too much? |
6
on: Today at 09:51:46 AM
|
||
Started by SamoZlo - Last post by SamoZlo | ||
Hi! I use Google translate. Sorry
I have an ECU me7.5 for Audi TT AUQ, automatic transmission. My car has a manual transmission. Audi a3 8L I can't change the ECU coding. Encoding 11570. Changed 7 to 0. No errors occurred. Unfortunately the encoding has not changed. There is no information about manual transmission in the flash? The ECU does not see which gear is in use (used to view me7logger). Please, I beg. Share the crossflash with manual transmission for my software. ECU 0261 207 775 Software 1037 36 6366 Type ME7.5 Thank you ! |
7
on: Today at 09:20:14 AM
|
||
Started by fredrik_a - Last post by prometey1982 | ||
Hi! Im new here, read all thread, but Im not so much expirenced in using WinOLS and therefore Im asking for help or hint. 20FWHJ is very old software. You shouldn't touch ESKONF to disabl rear lambda. You should disable CDHSH, CDLSH and CDLASH.According to the Prometey's post #1439 about decreasing fan start temperature , is there anybody who can tell me what address is this sequence of bytes placed? I have searched this sequence, but without any positive results. And the second case: what address is ESCONF for 20FWHJ ? I cheched at 0x1260E but it seems not to be correct address Thank You all for any kind of help Original file from car attached: And this software hasn't 2d maps for fan mode. This software has some variables for different fan speeds. P80 A2L has these variables for fan. So you can find these variables by finding same maps in your software. |
8
on: Today at 08:41:11 AM
|
||
Started by ampmod - Last post by ampmod | ||
Thank You, I Changed a lot of software and found with label - but it is still showed nothing in the third row.
|
9
on: Today at 05:23:43 AM
|
||
Started by fredrik_a - Last post by V70user | ||
Hi! Im new here, read all thread, but Im not so much expirenced in using WinOLS and therefore Im asking for help or hint.
According to the Prometey's post #1439 about decreasing fan start temperature , is there anybody who can tell me what address is this sequence of bytes placed? New result. Fan start temperature was lowered to 95 degrees. There are two maps in Volvo BINs. They can be found by next bytes sequence 6 64 203 204 215 221 222 0 0 20 180 221 221 Axis values is motor temperature. Multipler is 0.75 offset is -48. By lowering these values start fan temperature can be lowered. I have searched this sequence, but without any positive results. And the second case: what address is ESCONF for 20FWHJ ? I cheched at 0x1260E but it seems not to be correct address Disabling rear lambda with ESKONF for 50WRHJ software. ESKONF is at 0x1260E. Default value is 0C 00 3C FC 00 FC 33 (7 bytes length) I may be wrong about lenght it can be 6 bytes. To disable rear lambda and rear lambda heater diagnostics you need to change ESKONF to next: 0C C0 3C FC 00 FF 33 I checked pre facelift cars and non R software. It looks like the bitpair pattern is the same. Second byte must be changed to C0 (6 and 7 bits must be set). And six byte's low two bits must be set. Thank You all for any kind of help Original file from car attached: |
10
ECU Files / ECU Definition File Requests / Re: 0281010741 Alfa 2.4 JTD 150 CV EDC15C7 Mappack or Help needed.
on: Today at 04:02:30 AM
|
||
Started by Steven97i1 - Last post by Steven97i1 | ||
I am not sure what there is to recognize? Open the damos, it tells you exactly what everything is. And no there aren't that amount of TQL in your file that are active... Put the 1.9 JTD damos in compare mode in OLS and you can define almost the entire file. Every Damos or mappack says after importing Adress 00000 So sadly i cant just pin point some of the maps |