funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« on: September 09, 2014, 05:46:10 AM »
|
|
|
Hallo,
can someone correct my checksum, please?
|
|
|
Logged
|
|
|
|
_nameless
|
|
« Reply #1 on: September 11, 2014, 06:24:40 PM »
|
|
|
has a no read tag... im not going to scroll threw the hex to find it... post version or remove no read yourself
|
|
|
Logged
|
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #2 on: September 11, 2014, 10:05:18 PM »
|
|
|
Hi Marty,
sorry i've removed the NOREAD flag.
Thank You!
|
|
|
Logged
|
|
|
|
k0mpresd
|
|
« Reply #3 on: September 11, 2014, 10:34:27 PM »
|
|
|
corrected with noread tag.
|
|
|
Logged
|
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #4 on: September 11, 2014, 11:34:23 PM »
|
|
|
Thank you very very much guys!!!
|
|
|
Logged
|
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #5 on: September 30, 2014, 10:34:02 PM »
|
|
|
Hello,
i have to gorget to delete the rear O2 Sensor!
So i correct this:
10/01/2014 07:02:53 Scalar: CDHSH changed from 1.00 (0x01) to 0.00 (0x00). 10/01/2014 07:03:00 Scalar: CDHSHE changed from 1.00 (0x01) to 0.00 (0x00). 10/01/2014 07:03:27 Scalar: CDLASH changed from 1.00 (0x01) to 0.00 (0x00). 10/01/2014 07:03:48 Scalar: CDLSH changed from 1.00 (0x01) to 0.00 (0x00). 10/01/2014 07:16:32 Scalar: CLRSHK changed from 16.00 (0x10) to 0.00 (0x00). 10/01/2014 07:18:32 Scalar: CLRSKA changed from 1.00 (0x01) to 0.00 (0x00).
Is that enought?
Can someone correct the checksums again, please?
|
|
|
Logged
|
|
|
|
nyet
|
|
« Reply #6 on: September 30, 2014, 11:05:19 PM »
|
|
|
ME7Sum v0.1.0 or later *may* work on this bin, but no guarantees!
I would appreciate you testing it, but you should have a backup ecu (in case the car doesn't start after a few weeks) or way to bootmode the image just in case...
It is a risk, so I can understand if you don't want to gamble.
|
|
|
Logged
|
|
|
|
hopsis
Full Member
Karma: +13/-4
Offline
Posts: 174
|
|
« Reply #7 on: September 30, 2014, 11:37:35 PM »
|
|
|
I tried with the latest ME7Sum. C:\Users\Käyttäjä\Desktop\tunettamiset\Me7sum\temp>me7sum kopio.bin corrected_me 7sum.bin ME7Tool (v0.1.0) [Management tool for Bosch ME7.x firmwares] Inspiration from Andy Whittaker's tools and information. Written by 360trev and nyet [BSD License Open Source].
Attempting to open firmware file 'kopio.bin'
Step #1: Reading ROMSYS .. Startup section: word[0x00008000]+word[0x0000FFFE] @8038 Add=0x00010033 CalcAdd=0x00010033 ADD OK Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF @803c Add=0x009E95DA CalcAdd=0x009E95DA ADD OK All param page: word[0x00010000]+word[0x0001FFFE] @1bf06 Add=0x971D CalcAdd=0x971D ADD OK
Step #2: Reading RSA signatures .. Searching for RSA offset #0...OK Searching for RSA offset #1...OK Signature: @8ff60-8ffe0 Modulus: @1696a-169ea Exponent: @169ea = 3 Searching for MD5 ranges...OK MD5 Block Offset Table @16946 [32 bytes]: 1) Adr: 0x00010002-0x00013FFE 2) Adr: 0x00014252-0x00017F4E 3) Adr: 0x00018192-0x0001FBDC 4) Adr: 0x00026A00-0x0002FFFC EncrMD5: 87 0b e6 11 25 50 7a 53 c0 a3 8d 64 c4 b7 79 15 CalcMD5: 2c 64 16 fe 6e 45 bf ea 80 dd 8b 4c 56 7d 93 e4 1) Adr: 0x00010002-0x00013FFE 2) Adr: 0x00014252-0x00017F4E 3) Adr: 0x00018192-0x0001FBDC 4) Adr: 0x00026A00-0x0002FFFC ** FIXED **
Step #3: Reading Main Data Checksums .. Searching for main data CRC pre block...missing Searching for main data CRC/csum blocks...OK Searching for main data CRC offsets...missing Searching for main data checksum offsets...OK 1) Adr: 0x010002-0x013FFE CalcCSM: 00135BB4 2) Adr: 0x014252-0x017F4E CalcCSM: 0026854D 3) Adr: 0x018192-0x01FBDC CalcCSM: 0044F30D 4) Adr: 0x026A00-0x02FFFC CalcCSM: 00C172EA @8ffe0 CSM: 00C1730E CalcCSM: 00C172EA ** FIXED **
Step #4: Reading Main Program Checksums .. Searching for main program checksum..OK ROM Checksum Block Offset Table @27af6 [16 bytes]: 1) Adr: 0x000000-0x00FBFF 0x00FC00-0x01FFFF SKIPPED CalcChk: 0x21960ADE CalcChk: 0xDB12302A 2) Adr: 0x020000-0x0FFFFF @fffe0 Chksum: 0x2F0D2278 CalcChk: 0x2F183218 ** FIXED **
Step #5: Reading Multipoint Checksum Blocks .. Searching for multipoint block descriptor #1...missing Searching for multipoint block descriptor #2...OK 1) <1fbde> Adr: 0x000000-0x003FFF Chk: 0x0FA0F5CF Boot: (whitelisted) OK 2) <1fbee> Adr: 0x004000-0x007FFF Chk: 0x0F4716B3 Boot: (whitelisted) OK 3) <1fbfe> Adr: 0x000000-0x003FFF Chk: 0x0FA0F5CF CalcChk: 0x0FA0F5CF OK 4) <1fc0e> Adr: 0x004000-0x007FFF Chk: 0x0F4716B3 CalcChk: 0x0F4716B3 OK Multipoint #2: [66 blocks x <16> = 1056 bytes]
*** Found 70 checksums in kopio.bin
Attempting to output corrected firmware file 'corrected_me7sum.bin' Ý Opening 'corrected_me7sum.bin' file for writing Ý Writing to file Ý Validating size correct 1048576=1048576 Ý All OK, closing file
*** DONE! 7/7 error(s) corrected in kopio.bin! ***
C:\Users\Käyttäjä\Desktop\tunettamiset\Me7sum\temp>me7check corrected_me7sum.bin
============================================================================== me7check v1.12 (c) mki, 06/2004-05/2012 Checking file corrected_me7sum.bin (size=1048576) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 40/1/ME7.5/5/4013.03//24C/Dst03o/021003// -> Contents of ECUID data table: - '0261207420' (SSECUHN) - '1037369397' (SSECUSN) - '8N0906018AP ' (VAG part number) - '0003' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004'
RSA signature failure found -> Found 1 error!!! ******************************* I'm at work now and won't be at my Winols computer until tomorrow but here's the ME7Sum output file if You feel like a guinea pig.
|
|
|
Logged
|
|
|
|
nyet
|
|
« Reply #8 on: September 30, 2014, 11:53:19 PM »
|
|
|
Yep. I still don't know why ME7Check doesn't like my RSA corrections
|
|
|
Logged
|
|
|
|
ddillenger
|
|
« Reply #9 on: October 01, 2014, 12:15:27 AM »
|
|
|
Yep. I still don't know why ME7Check doesn't like my RSA corrections I heard Becky telling Stacy that ME7Check called your RSA corrections doody heads.
|
|
|
Logged
|
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!
Email/Google chat: DDillenger84(at)gmail(dot)com
Email>PM
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #10 on: October 01, 2014, 01:51:06 AM »
|
|
|
I need my car every day and have a Galetto Cable, but i won't to flash the me7sum files! Otherwise i wouldn't ask for a checksumcorrection here.
|
|
« Last Edit: October 01, 2014, 02:59:10 AM by funnix »
|
Logged
|
|
|
|
nyet
|
|
« Reply #11 on: October 02, 2014, 09:54:43 AM »
|
|
|
Yep. I still don't know why ME7Check doesn't like my RSA corrections Problem fixed as of v0.1.1
|
|
|
Logged
|
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #12 on: October 02, 2014, 10:42:16 AM »
|
|
|
Awesom! Thank you!
|
|
|
Logged
|
|
|
|
|