Pages: [1]
Author Topic: 1.8t AJQ boost acting up  (Read 1449 times)
denniss112
Full Member
***

Karma: +7/-1
Offline Offline

Posts: 114


Audi TT 99' | 180+HP FWD


« on: July 31, 2022, 06:55:11 AM »

I recently made a tune, but since today the car is acting up. Starting around 2600 RPM it will hassitate to build more boost. I made a log when this happens, but I am not sure what the problem is. To me it sounds mechanically, perhaps a small leak that will cause this?

Right after the log, I started the car again and did another log after, and the car + log looks like it should be. Its after things heat up it causes problems..

All I have done since the tune was a replacement of the PCV system.
Logged
denniss112
Full Member
***

Karma: +7/-1
Offline Offline

Posts: 114


Audi TT 99' | 180+HP FWD


« Reply #1 on: August 02, 2022, 05:36:36 AM »

Anyone have a idea what the problem could be? Its happening all the time now..
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12234


WWW
« Reply #2 on: August 02, 2022, 03:00:30 PM »

N75s are very sensitive to heat, could be related.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Amadeus
Jr. Member
**

Karma: +0/-8
Offline Offline

Posts: 25


« Reply #3 on: August 04, 2022, 08:21:38 AM »

Not tune related but if it's struggling to build boost, like cutting ignition, then that could be bad/fouled coils or spark plugs. Especially if your doing all this for the first time. The wastegate rod could also be loose but It sounds like the ECU isn't allowing it to build more boost. You could also try resetting the ECU.

Sent from my ASUS_I003D using Tapatalk
Logged
denniss112
Full Member
***

Karma: +7/-1
Offline Offline

Posts: 114


Audi TT 99' | 180+HP FWD


« Reply #4 on: August 04, 2022, 08:37:43 AM »

N75s are very sensitive to heat, could be related.

Problem has been found, faulty coils. I had a spare N75 but they work both fine.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)