Pages: [1]
Author Topic: P0605 Internal Control Module: ROM Error  (Read 4767 times)
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246


« on: April 10, 2013, 04:37:14 PM »

After turning off immo with dump from here i get always this error in my ecu.
my ecu is 06A906018CG 0261206518
Can somebody help me to disable this error?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: April 10, 2013, 05:39:36 PM »

wouldnt the easier solution be to disable immo on your original eeprom? then the problem fixes itself.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1579


« Reply #2 on: April 10, 2013, 10:24:06 PM »

Please upload your immo offd file. I bet the failure is not within your flash.
Logged
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246


« Reply #3 on: April 11, 2013, 01:26:13 AM »

Problem is i have no original dump Sad
i get this ecu with damaged serial eeprom.
Logged
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640


« Reply #4 on: April 11, 2013, 01:34:47 AM »

Here is an eeprom and matching flash for 06A906018R. Close as I have Smiley
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
eliotroyano
Hero Member
*****

Karma: +47/-8
Offline Offline

Posts: 807


« Reply #5 on: August 05, 2013, 02:28:50 PM »

Problem is i have no original dump Sad
i get this ecu with damaged serial eeprom.
I have one if you still need it.
Regards,
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)