|
Title: Definition for the 1.8T 210hp AMK S3 06A906018J Post by: vagenwerk on January 27, 2013, 01:49:15 PM Hi
Looking for ols /kp. definition map pack 1.8T 210hp AMK S3 06A906018J Thanks ! Gregor Title: Re: Definition for the 1.8T 210hp AMK S3 06A906018J Post by: icezero on January 30, 2013, 03:22:05 AM which sw??
to found all what you need is really simple Title: Re: Definition for the 1.8T 210hp AMK S3 06A906018J Post by: vagenwerk on February 21, 2013, 11:44:59 AM sw 0004
here is 018J file could you give me some clue ? i try to compare to 018cb.ols but it seems to be quite different. Title: Re: Definition for the 1.8T 210hp AMK S3 06A906018J Post by: ddillenger on February 21, 2013, 12:20:11 PM sw 0004 here is 018J file could you give me some clue ? i try to compare to 018cb.ols but it seems to be quite different. You have stumbled into the hardest part of tuning (IMHO). If there is no available definition file you need a similar bin that has the required maps defined. Open the xdf/kp and browse the map you want to find. Look at the address. Now open both files (the defined bin, and your bin) in a hex editor. Browse to the location of the map in the KNOWN file. Then, observe the map features, and surrounding data. Now look for the same pattern in your bin. It's awful at first. After a while hex makes sense (scary). You have to do the same for the axis data as well. Good luck, it's not fun. If you can't do this, you can always pay someone to make you an xdf. Title: Re: Definition for the 1.8T 210hp AMK S3 06A906018J Post by: vagenwerk on February 22, 2013, 05:29:43 AM THANKS to You ddillenger - I slowly made first own def. - 018J , but it takes few whiles to find what you want :)
It was VERY USEFUL POST I Click Applaud to You :) |