NefMoto > Technical > Diagnostics > Shorted out ecu now have B+ to pin 86 (cam signal) ME7.5
Pages: [1]
« previous next »
Author Topic: Shorted out ecu now have B+ to pin 86 (cam signal) ME7.5  (Read 4139 times)
coltaaan
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« on: April 24, 2013, 07:50:19 AM »
ME7.5 I have B+ to pin 86 on the ecu. pin 86 is the camshaft position sensor signal wire and should read 5v sqaure wave. I have checked the wire from ecu to sensor. its fine. I got a used ecu installed it and it instantly fried it. Has anyone had this problem or possibly know the ecu schematic. I believe its only pin 86 that is fried. How can I track down this short?
Logged
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640
« Reply #1 on: April 24, 2013, 08:01:50 AM »
Why is this a pole? How did you short the ecu?
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
coltaaan
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #2 on: April 24, 2013, 08:44:27 AM »
Quote from: ddillenger on April 24, 2013, 08:01:50 AM
Why is this a pole? How did you short the ecu?

Sorry first time on this forum didnt mean to post as a pole. Thats what im asking I dont know what is shorting it. I have tested all the basics power & ground to ecu the camshaft signal wire all are good but something is causing a short to happen and i believe its only on pin 86.
Logged
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640
« Reply #3 on: April 24, 2013, 08:52:53 AM »
Why did I write pole instead of poll? lol

Check your o2 sensor wires for damage.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #4 on: April 28, 2013, 06:22:28 AM »
I have also seen a bad cam position sensor cause a no pedal issue but this did not fry ecu,along with all the other things such as melted o2 sensor wires internally shorted o2 sensor due to water damage
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • May 14, 2024, 03:47:19 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)