NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Cruise control turn of every 2-3 minutes audi TT 1.8T
Pages: [1]
« previous next »
Author Topic: Cruise control turn of every 2-3 minutes audi TT 1.8T  (Read 3333 times)
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1423
« on: August 23, 2019, 01:41:33 PM »
My friend have TT mk1 512 kb ECU. With instaled cruise control. Problem is that cruise control go off after 2-3 minutes of driving. He try to change brake, clutch and
Cruise control switch. Everthing new and nothing changed, checked wire loom.
What values can I log via me7logger to try identify problem?
Logged
fknbrkn
Hero Member
*****

Karma: +177/-18
Offline Offline

Posts: 1405


mk4 1.8T AUM
« Reply #1 on: August 23, 2019, 03:02:04 PM »
FGRABED 1.10 Abschaltbedingungen Fahrgeschwindigkeitsregler
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1423
« Reply #2 on: August 24, 2019, 02:55:02 AM »
Thank you  Wink
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1423
« Reply #3 on: September 30, 2019, 01:47:45 PM »
I checked car yestreday. Problem is the car in original have 5sp gearbox, and he put in a 6sp.
Ecu doesen't allow me to recode it to 6 sp.
Soo, will be enought to add 6 gear in NVQUOT
Or I need to put eeprom file and flash from 6 sp ECU
Logged
prj
Hero Member
*****

Karma: +917/-428
Offline Offline

Posts: 5858
« Reply #4 on: October 01, 2019, 12:58:39 AM »
Yes of course it will be enough.
But not "add 6th gear".
You need to recalibrate it to be correct for your gearbox!
Logged
PM's will not be answered, so don't even try.
Log your car properly.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12235


WWW
« Reply #5 on: October 01, 2019, 12:42:15 PM »
Quote from: prj on October 01, 2019, 12:58:39 AM
Yes of course it will be enough.
But not "add 6th gear".
You need to recalibrate it to be correct for your gearbox!

He can't re-calibrate for the 6th gear if the 5sp file doesn't support the 6th gear map, unless im mistaken.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 196



WWW
« Reply #6 on: October 01, 2019, 05:03:32 PM »
Quote from: nyet on October 01, 2019, 12:42:15 PM
He can't re-calibrate for the 6th gear if the 5sp file doesn't support the 6th gear map, unless im mistaken.

All (or 99%, because I'm dont have the absolute sure) 1.8T files have min and max quotients for 6th gear. So its a matter of calibrate them on the current file.
Logged
Audi A3 8L
1984cc stroker - E100 - ME7 wideband converted - 400whp target
Instagram: @a3stroker
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1423
« Reply #7 on: October 01, 2019, 10:45:04 PM »
Yes of course I will calibrate it to new gearbox
In this file looks like for 6 gear the values are zero  (first gear start at 0x1161C  LoHi )
I will give it a try but it will take a time before I reply, beacuse is my friend is far away,and I see him every few moths
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • May 20, 2024, 01:11:01 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)