|
Title: 2000 a4 4b0906018P xdf request Post by: corradovolksb on July 27, 2012, 08:32:01 AM Does anyone have a 2000 a4 4b0-906-018-P xdf I can have. I have tried making my own and cannot figure it out. Or is there a program that can make one for you? I have done alot of research and can not find any good info. Thank you in advance.
Title: Re: 2000 a4 4b0906018P xdf request Post by: corradovolksb on August 02, 2012, 09:58:44 AM this is the bin file for my 2000 a4. if someone could please give me a readout of map locations I will atempt to creat my own xdf. If someone already has an xdf that would be awesome also but if not I will try and build my own. thank you
Title: Re: 2000 a4 4b0906018P xdf request Post by: corradovolksb on August 06, 2012, 03:58:33 PM Can someone please help me out or point me in the right direction for building my own xdf
Title: Re: 2000 a4 4b0906018P xdf request Post by: corradovolksb on August 25, 2012, 07:27:52 AM I really need an xdf for my file. I can pay for one if needed to. thanks
Title: Re: 2000 a4 4b0906018P xdf request Post by: airtite on August 28, 2012, 11:20:35 PM there is a lot of info on here already, building an xdf isnt a 5 minute job either. Open the bin in winols and open another already defined file and use those to assist you in locating the maps in your bin once defined in winols copy the addresses etc over too a new xdf in tunerpro
Title: Re: 2000 a4 4b0906018P xdf request Post by: corradovolksb on August 28, 2012, 11:32:22 PM Thank you for the info. I will give it a shot.
Title: Re: 2000 a4 4b0906018P xdf request Post by: prj on August 29, 2012, 09:41:27 AM What are you trying to do and how much are you willing to pay? :)
Title: Re: 2000 a4 4b0906018P xdf request Post by: corradovolksb on August 29, 2012, 12:55:45 PM I want to make it a stage 1 16psi, a little more timing, change the afr and maby add anti lag. How much do you want? Do you have an xdf?
Title: Re: 2000 a4 4b0906018P xdf request Post by: airtite on October 03, 2012, 11:23:27 PM something wrong with your file
============================================================================== ME7Check_linux v1.11 (c) mki, 06/2004-07/2011 Checking file 2000a41.8t018P.bin (size=1048576) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/ -> Contents of ECUID data table: - '0261206537' (SSECUHN) - '1037352750' (SSECUSN) - '4B0906018P ' (VAG part number) - '0006' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' -> NO calls of 8F00E4 or 000000 within calc_data_checksum found page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0x0082FA page checksums: invalid start address 0x387E82FA Romsys checksum failure(s) found Overall checksum failure found -> Found 35 errors!!! ******************************* Title: Re: 2000 a4 4b0906018P xdf request Post by: csosnowski on December 30, 2012, 12:36:45 PM I had a similar issue when reading my 018P box. I split the bin using tunerpro because the file was basically double the size it was supposed to be.
The split file checks, another opinion would be beneficial though since I am pretty new to this as well. ============================================================================== ME7Check v1.11 (c) mki, 06/2004-07/2011 Checking file C:\Users\Chris\Desktop\CARS\Audi Tuning & Performance\ECU FILES\bin\1.8t\ATW\2000a41.8t018P - split.bin (size=524288) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/ -> Contents of ECUID data table: - '0261206537' (SSECUHN) - '1037352750' (SSECUSN) - '4B0906018P ' (VAG part number) - '0006' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' -> No errors found. File is OK. ********************* Title: Re: 2000 a4 4b0906018P xdf request Post by: k0mpresd on December 30, 2012, 12:39:19 PM 018p is a 512kb/400bb flash. so youre correct. if youre ever unsure just go to 0x7ffff and see if it has the ending chksum there. if it does, its a 512kb file. to make double sure, go to 0xfffff and see if the same chksum is located there as well.
|