NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > ME7 EEPROM programmer
Pages: 1 ... 14 15 [16] 17 18 ... 63
« previous next »
Author Topic: ME7 EEPROM programmer  (Read 858003 times)
machine007
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #225 on: November 20, 2012, 03:53:13 AM »
Hello

Volvo me7 0261208289 1039S5977
I want read out EEPROM flie.
Now I'm using me7eeprom.exe

What number CSpin for this ecu ?

Please let me know........ Cry

regard
« Last Edit: November 20, 2012, 03:59:14 AM by machine007 » Logged
Bosse
Jr. Member
**

Karma: +3/-2
Offline Offline

Posts: 31
« Reply #226 on: November 20, 2012, 02:18:10 PM »
Ok,volvo me7.To -01 simens  OK.From -02 on infineon cpu Not readable with me7 eeprom programmer.
Logged
haygood
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #227 on: November 27, 2012, 02:42:45 AM »
How bad is the setup for using the Hex+Com+CAN?  I can't tell from the ross-tech site whether or not I would have to swap the drivers around every time I want to switch from using VCDS to using Argdub's program or Nefmoto.  If I can set it up once and still use all of VCDS, that would be cool, even if I have to remember which USB port to use for which program.

Thanks.
Brian
Logged
rkam
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 55
« Reply #228 on: November 27, 2012, 02:55:07 PM »
@machine007
Looks like P8.2 as my newer one mentioned previosly in this thread. But you can verify by measuring on the circuit board.

@Bosse
Infineon works also.
Logged
machine007
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #229 on: December 02, 2012, 05:04:29 AM »
Quote from: rkam on November 27, 2012, 02:55:07 PM
@machine007
Looks like P8.2 as my newer one mentioned previosly in this thread. But you can verify by measuring on the circuit board.

thank you.

Please tell me how to do that?
I was set as P8.2.
But read immo data writing to other ECU after could not start engine.
Logged
rkam
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 55
« Reply #230 on: December 02, 2012, 01:29:07 PM »
Download some datasheets from a site like www.alldatasheet.com
P8.2 will be pin 11 on a C167CS
On a 5p08c3 or ST95P08B1TR pin 1 will be the CS pin.
Then use some kind of measuring tool to check that pin 11 of the cpu is connected to pin 1 of the eeprom.

But if you have already both read and written the eeprom, then your problem is something else.
Logged
machine007
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #231 on: December 08, 2012, 06:15:08 AM »
Quote from: rkam on December 02, 2012, 01:29:07 PM
Download some datasheets from a site like www.alldatasheet.com
P8.2 will be pin 11 on a C167CS
On a 5p08c3 or ST95P08B1TR pin 1 will be the CS pin.
Then use some kind of measuring tool to check that pin 11 of the cpu is connected to pin 1 of the eeprom.

But if you have already both read and written the eeprom, then your problem is something else.



thank you very much.
I will be try next week.

I want to make the clone ECU.
Because immo file read from "Master ECU"

Thanks a lot.
Logged
Bosse
Jr. Member
**

Karma: +3/-2
Offline Offline

Posts: 31
« Reply #232 on: December 09, 2012, 12:33:02 PM »
rkam,u are right. I dident se the earlier post.
I took a look at the datasheet also.
And if someone like to know Volvo D5 edc15 is cs p2.3 (tested) bootmode
Logged
tuananh198449
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #233 on: January 11, 2013, 05:56:03 AM »
i have download sofware. But it don't indicator Install. why? help me
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1577
« Reply #234 on: January 11, 2013, 06:37:12 AM »
some knowledge of english is recommended

http://nefariousmotorsports.com/forum/index.php?topic=1168.msg10764#msg10764
Logged
tobygolf66
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 40
« Reply #235 on: January 18, 2013, 04:04:03 PM »
please help me with virgin eeprom from Audi A4 1.8T Me7 BEX engine

Need eeprom from : 8E0909518AN 0261208285 1.8T BEX chipnumber 368075

i can flash ecu but give an error message and car not start.

i tried bootmode also but not work.

memory not finish written or something

who can help me??
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640
« Reply #236 on: January 18, 2013, 04:07:28 PM »
Give this a shot.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
tobygolf66
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 40
« Reply #237 on: January 20, 2013, 01:36:05 PM »
Quote from: ddillenger on January 18, 2013, 04:07:28 PM
Give this a shot.

thanks,but i have found the error.

rgds  Cool
Logged
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« Reply #238 on: January 21, 2013, 12:29:53 PM »
Love this program!

I have an ECU that I've already read/written to already. However, now I get to Searching Chip_Select pin ... FAIL. I know it has something to do with the ECU.

What might cause this?

Thanks,
Rey
Logged
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140
« Reply #239 on: January 31, 2013, 06:12:35 PM »
I love the program. and I'm stuck.

I have a junkyard ecu, and I know that without the cluster plugged in it will need to be in bootmode before me7_95040 can do anything with it.  I believe I am getting the ecu into bootmode (kwp protocols don't work), but then neither me7_flasher, galletto, or me7_95040 can connect to the ECU, no matter what baud. Once repowered, the ecu is fine with kwp protocols.

as a junkyard ecu, I know that I will need to immo-defeat it or always bootmode communicate, but I can't seem to get anything to talk to the ecu in bootmode. any ideas?

cmd log attached

me7.1
29f400bb

Edit: apparently mkiv vw's need power to pin 21 as well, per this thread, I'll have to try it tomorrow...

Edit: success after adding a switch to pin3.
« Last Edit: February 01, 2013, 08:48:39 PM by cyril279 » Logged
Pages: 1 ... 14 15 [16] 17 18 ... 63
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • May 07, 2024, 09:52:22 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 18 queries. (Pretty URLs adds 0s, 0q)