chiptuner123
Full Member
Karma: +0/-8
 Offline
Posts: 50
|
 |
« on: December 05, 2017, 12:16:17 AM »
|
|
|
I do the below maps in audi A4 163 hp and work ok
VNMX 11AFB 8bit
DNMAXH 16494 16bit
ITNMXH 16498 16bit
NMAX 1649A 16bit
NMAXOG 164A2 16bit
TMOTNMX 1F9EA 8bit
TNMXH 164A6 16bit
I have some question ,Can anyone explain to me,what mean the below information?
Additional IMPORTANT Info!
Be aware that when using this method of launch control there is a time limit of 10.9 minutes for driving above the launch RPM. Therefore I suggest you set this appropriately high, somewhere above your normal cruising range. After 10.9 minutes the throttle shuts off until the RPM falls below the launch RPM... This is a potentially hazardous condition so please be aware and implement this code at your own risk!
|
|
|
|
|
Logged
|
|
|
|
BoobieTrap
Full Member
Karma: +3/-0
Offline
Posts: 74
|
|
« Reply #1 on: December 05, 2017, 12:46:41 AM »
|
|
|
From S4Wiki:
TNMXH (1631A) - This is the time duration of the raised (normal) rev limit. Set this to its maximum value of 655.3500 seconds. In theory, this may trigger at some point, but nobody has reported such a thing yet.
For example, if you set your launch limit to 4500 RPM, then the ECU will let you drive continuously above this limit only for a period of TNMXH (655.35 second = 10.9 minutes). Hence you should always set it above your normal cruising limit.
Not a problem for track, as the RPMs should drop below the limit on any tight corners, the only potential problem is if you set it too low and you cruise on an empty motorway above the launch limit RPM, then the ECU will cut throttle after 10.9 minutes until your RPMs drop below the threshold.
|
|
|
|
|
Logged
|
|
|
|
chiptuner123
Full Member
Karma: +0/-8
Offline
Posts: 50
|
|
« Reply #2 on: December 05, 2017, 01:02:39 AM »
|
|
|
thanks, do you know the map name that can activate the throtle lounch control? Can I choose the % of pedal like 50% or 100% to activate the lounc control?
|
|
|
|
|
Logged
|
|
|
|
THANAS
Jr. Member
Karma: +3/-2
Offline
Posts: 43
Yes.
|
|
« Reply #3 on: December 05, 2017, 01:23:22 AM »
|
|
|
thanks, do you know the map name that can activate the throtle lounch control? Can I choose the % of pedal like 50% or 100% to activate the lounc control?
Not possible with the soft launch hack, it's rpm based only. |
|
|
|
|
Logged
|
|
|
|
chiptuner123
Full Member
Karma: +0/-8
Offline
Posts: 50
|
|
« Reply #4 on: December 05, 2017, 02:29:09 AM »
|
|
|
any info how to no lift shift??
|
|
|
|
|
Logged
|
|
|
|
|
|
focalpoint519
Full Member
Karma: +29/-63
Offline
Posts: 148
|
|
« Reply #6 on: December 05, 2017, 06:45:59 AM »
|
|
|
what soft version are you using, i suggest you use a compatable BIN with the 2 step LC tool on this website use the v.5 script, this isnt as hard as some try make it, many here will tell you to learn your own code (very few saying this did) http://nefariousmotorsports.com/forum/index.php?topic=3349.0download V5 and try it on a 06a906032HS bin and report back or patch your bin your working with and ask someone that's not a dick like andy to help you fix, lots will tell you not to disable the RSA but if you dont want to learn your own code, or how to manually edit or disclude problemed parts, this is a workable way, starting with a compatible bin (launch script compatible) or having actual understanding is best though https://www.andywhittaker.com/ecufix/or send me your bin and i will add multimap, with 2 srep and a WGDC hack |
|
|
|
« Last Edit: December 05, 2017, 06:58:26 AM by focalpoint519 »
|
Logged
|
|
|
|
chiptuner123
Full Member
Karma: +0/-8
Offline
Posts: 50
|
|
« Reply #7 on: December 05, 2017, 10:39:06 AM »
|
|
|
sorry for my questions.what is the v5?? please give me your email to send you my bin project.if you can add mappack i am happy.
|
|
|
|
|
Logged
|
|
|
|
chiptuner123
Full Member
Karma: +0/-8
Offline
Posts: 50
|
|
« Reply #8 on: December 05, 2017, 10:50:59 AM »
|
|
|
i use winols1500
|
|
|
|
|
Logged
|
|
|
|
focalpoint519
Full Member
Karma: +29/-63
Offline
Posts: 148
|
|
« Reply #9 on: December 05, 2017, 11:33:48 AM »
|
|
|
pm me your email mate
|
|
|
|
|
Logged
|
|
|
|
|
SB_GLI
|
|
« Reply #10 on: December 05, 2017, 02:16:53 PM »
|
|
|
....and a WGDC hack
In for details. |
|
|
|
|
Logged
|
|
|
|
|
vwaudiguy
|
|
« Reply #11 on: December 05, 2017, 04:54:52 PM »
|
|
|
In for details.
Assuming it's the pre-control method prj posted a while back. |
|
|
|
|
Logged
|
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
|
|
|
|
|
|
SB_GLI
|
|
« Reply #13 on: December 06, 2017, 07:18:27 AM »
|
|
|
I wouldn't mind seeing a write-up of how you implement this me7 for an aftermarket turbo. For previous poster, the pre-control method is not a hack, it's a calibration method. There's no magical switch to flip that would give you perfect boost.  |
|
|
|
|
Logged
|
|
|
|
chiptuner123
Full Member
Karma: +0/-8
Offline
Posts: 50
|
|
« Reply #14 on: December 06, 2017, 07:25:27 AM »
|
|
|
can you send me an ori and mod file to see your boost calibration??
|
|
|
|
|
Logged
|
|
|
|
|
