Pages: [1]
Author Topic: ME7.1.1 Audi A8 W12 6.0 L 2008  (Read 2163 times)
art-b
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: July 09, 2023, 11:34:13 AM »

Hi mates,
I have here from an Audi ME7.1.1 A8 W12 6.0L master and slave ECUs.
The eeprom from the master control unit is defective.
But from the slave control unit is still intact.
My question:
Are both eeproms are identical?
Can I write slaveeeprom on master control unit?
EEprom is 95P08.

Thanks in advance.
Logged
mdccode5150
Full Member
***

Karma: +12/-4
Offline Offline

Posts: 122


« Reply #1 on: October 23, 2023, 04:18:38 PM »

I am not sure, but I believe that the harness determines master slave. After install and run they are different somehow, and if you swap them you'll get phantom misfires. Do you have a copy? I will check and see if I do.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)