Pages: [1]
Author Topic: ECU 2001 a4 1800turbo .. fault  (Read 4359 times)
ziadoov
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« on: May 04, 2011, 11:11:36 AM »

when the fault is fuel pump and after ur replace the pump and scan for faults its show u the same fault ..does that mean i have to re program the ecu it self ? or replace it? and what kind of software should i use ? HELPPPPPPPPP ME PLZ YOU SMART ENGINEERSSSSSSSSSSS
Logged
GWerks
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 66


« Reply #1 on: May 04, 2011, 01:32:19 PM »

when the fault is fuel pump and after ur replace the pump and scan for faults its show u the same fault ..does that mean i have to re program the ecu it self ? or replace it? and what kind of software should i use ? HELPPPPPPPPP ME PLZ YOU SMART ENGINEERSSSSSSSSSSS

You had a bad fuel pump and your car threw a code for that correct? Now, you replaced your fuel pump and you're still throwing the code for a bad fuel pump?

Can you be a little more specific?
Logged
ziadoov
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #2 on: May 04, 2011, 01:55:38 PM »

when the fault is fuel pump and after ur replace the pump and scan for faults its show u the same fault ..does that mean i have to re program the ecu it self ? or replace it? and what kind of software should i use ? HELPPPPPPPPP ME PLZ YOU SMART ENGINEERSSSSSSSSSSS

You had a bad fuel pump and your car threw a code for that correct? Now, you replaced your fuel pump and you're still throwing the code for a bad fuel pump?

Can you be a little more specific?

yes sir ..thats exactly what happend .. and still give me the same fault .. what do u think i have to do ?and when i replaced the ecu with another used one it give me immo code required !! im sorry man im just biggner
« Last Edit: May 04, 2011, 02:05:06 PM by ziadoov » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)