how to lowe Trotle body plade position on idle

Pages: [1]

« previous next »

Author

Topic: how to lowe Trotle body plade position on idle (Read 3702 times)

lowrideris

Newbie

Karma: +0/-0
Offline

Offline

Posts: 7

	how to lowe Trotle body plade position on idle « on: July 12, 2012, 06:18:13 AM »

swaped trotle blade from 57mm to 63.. now idling at 1850.. and jumping rpm:(
what maps need to adjust to lower TB blade on idle ?
ECU ME1.5.5


	Logged

kenmac

Full Member

Karma: +6/-0
Offline

Offline

Posts: 161

	Re: how to lowe Trotle body plade position on idle « Reply #1 on: July 12, 2012, 10:38:58 AM »

Don't you just need to perform a throttle adaptation?

http://www.ross-tech.com/vag-com/cars/throttlebody.html

As far as I know, plate angle doesn't map to a certain rpm.


	Logged

Robson

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 26

	Re: how to lowe Trotle body plade position on idle « Reply #2 on: July 12, 2012, 03:33:48 PM »

I would be interested in this as well although i think my occasional problem is down to a faulty temp sensor .

Im sure i have read on here somewhere about tuning for different size throttle body size but cannot find it


	Logged

Robson

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 26

	Re: how to lowe Trotle body plade position on idle « Reply #3 on: July 13, 2012, 12:05:43 PM »

Just out of interest ME1.5.5 ......... are you tuning a z20let ??


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

May 14, 2024, 01:50:49 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search