NefMoto > Technical > Tuning > 01 S4 Table differences between stock Hitachi MAF and Bosch RS4 MAF
Pages: [1]
« previous next »
Author Topic: 01 S4 Table differences between stock Hitachi MAF and Bosch RS4 MAF  (Read 10386 times)
wickster
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 26
Car: 2001 Audi B5 S4
ECU: 8D0997551M 0002
Engine mods: K04 turbos, 85mm MAF housing with Hitachi MAF, Siemens 630cc/min, (60lb/min) injectors, Green coolant temp sensor

Currently wanting to try to start from scratch so this will be my log of the changes I've made based on research and the help of this forum. I'm just starting this today so lets see if we can get the car running well by the end of the work day.
Logged
'01.5 Audi S4 2.7T - 6MT - K04s - ASP 85mm Hitachi - 49lb Delphi
wickster
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 26
« Reply #1 on: October 27, 2010, 11:39:28 AM »
Looks like with the WIKI and my other resources available I should be able to correct my MAF variables and larger injector variables easily.
Logged
'01.5 Audi S4 2.7T - 6MT - K04s - ASP 85mm Hitachi - 49lb Delphi
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« Reply #2 on: November 12, 2010, 03:27:46 PM »
You should be able to use the 85mm MAF and 60lb Siemens injector file I posted as a place to start.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
wickster
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 26
« Reply #3 on: December 13, 2010, 09:45:09 PM »
I eventually figure this out and was able to scale the stock Hitachi table for my 85mm ASP MAF housing. Worked out very well.
I was reaching the limit of the stock MAF housing at 5800 RPM with my K04s, I'm now within the range of the 85mm scaling at all times.
Logged
'01.5 Audi S4 2.7T - 6MT - K04s - ASP 85mm Hitachi - 49lb Delphi
nitrorocket
Full Member
***

Karma: +0/-4
Offline Offline

Posts: 52
« Reply #4 on: January 09, 2011, 08:10:28 PM »
Quote from: wickster on December 13, 2010, 09:45:09 PM
I eventually figure this out and was able to scale the stock Hitachi table for my 85mm ASP MAF housing. Worked out very well.
I was reaching the limit of the stock MAF housing at 5800 RPM with my K04s, I'm now within the range of the 85mm scaling at all times.

What are you MAF settings? were you able to get the fuel correction in line accuratly after the housing switch?

I am looking something to compare mine to...
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • May 06, 2024, 06:08:02 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)