Pages: [1]
Author Topic: Audi A4 B6 2.5 EDC15VM+ Immo Off Help Please  (Read 1814 times)
gary_auto
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 11


« on: June 24, 2023, 09:07:12 AM »

Hi all , I'm trying to Immo off my ECU. I fitted a 2nd hand fuel pump (vp44) and now car stopped by Immo

I tryed vag k command (won't connect) even in xp

will vag tacho read ecu eeprom. I believe it will get my pin, but i dont have 2nd hand pump pin.

i have vcds cable and kkl 409.1 cable

please any help thanks
« Last Edit: June 24, 2023, 02:03:33 PM by gary_auto » Logged
elektronik13
Full Member
***

Karma: +10/-33
Offline Offline

Posts: 201


« Reply #1 on: June 24, 2023, 01:51:34 PM »

Hi all , I'm trying to Immo off my ECU. I fitted a 2nd hand fuel pump (vp44) and now car stopped by Immo

I tryed vag k command (won't connect) even in xp
share read eeprom and flash ecu
Logged
gary_auto
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 11


« Reply #2 on: June 24, 2023, 01:54:44 PM »

share read eeprom and flash ecu
What software?

Sent from my DN2103 using Tapatalk

Logged
elektronik13
Full Member
***

Karma: +10/-33
Offline Offline

Posts: 201


« Reply #3 on: June 24, 2023, 02:01:37 PM »

What software?

Sent from my DN2103 using Tapatalk


I don't understand what you mean
Logged
gary_auto
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 11


« Reply #4 on: June 24, 2023, 02:04:31 PM »

I don't understand what you mean

updated #1 post as it didnt show all.

what software can i use to read eeprom? thanks.
Logged
elektronik13
Full Member
***

Karma: +10/-33
Offline Offline

Posts: 201


« Reply #5 on: June 24, 2023, 02:10:10 PM »

updated #1 post as it didnt show all.

what software can i use to read eeprom? thanks.
Mpps19 reads eeprom and flash
The programs you have probably do not read this ecu
Logged
Filipe39
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 13


« Reply #6 on: July 18, 2023, 07:11:02 AM »

You can also use KTAG for example, but vagcommander must work for EEPROM, you have to have a problem somewhere...
Logged
_nameless
Hero Member
*****

Karma: +323/-450
Offline Offline

Posts: 2699



« Reply #7 on: July 18, 2023, 07:22:41 AM »

You can also use KTAG for example, but vagcommander must work for EEPROM, you have to have a problem somewhere...
Ktag has no support for edc15...
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)