Me7.1.1 Tacho signal ?

Pages: [1]

« previous next »

Author

Topic: Me7.1.1 Tacho signal ? (Read 2791 times)

hummel

Full Member

Karma: +1/-1
Offline

Offline

Posts: 62

	Me7.1.1 Tacho signal ? « on: September 02, 2019, 07:09:33 AM »

Hi guys,

I have a MkV R32 BUB with a 022906032CE ECU in my golf mk1. Normally the Tacho signal comes from t121/37 but it doesn't seems like it is the case with this ECU, I believe it is only communicating through CAN. Is this an programable issue, and if so, is there anyone that can help me with opening for the tacho signal so I can get my rev counter to work.

I attached my current file.

Thanks.


	Logged

gocebrzi

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: Me7.1.1 Tacho signal ? « Reply #1 on: October 13, 2019, 11:20:24 AM »

Pin 37 works, but you need new wiring for tacho


	Logged

BlackT

Hero Member

Karma: +79/-39
Offline

Offline

Posts: 1423

	Re: Me7.1.1 Tacho signal ? « Reply #2 on: October 13, 2019, 03:33:50 PM »

I think it is not posible, you must make some CAN to digital signal converter.
VSS input it can be changed via CWGGVFZG , but for tacho I didn't see there is a solution


	Logged

gocebrzi

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: Me7.1.1 Tacho signal ? « Reply #3 on: October 13, 2019, 10:01:25 PM »

Is posible on my S3 8L works pin 37, no need for recoding.Pin 37 is empty ,you need new wire from ecu,i use signal for LPG and tacho, ecu 032J 2.8 24v


« Last Edit: October 14, 2019, 04:35:37 AM by gocebrzi »	Logged

Kompiesto

Full Member

Karma: +4/-5
Offline

Offline

Posts: 109

	Re: Me7.1.1 Tacho signal ? « Reply #4 on: October 20, 2019, 01:18:54 AM »

I done communication by canbus with me7.1.1g. What You need?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

May 15, 2024, 11:30:54 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search