NefMoto

Noob Zone => Noob Questions => Topic started by: 06A63.2 on August 23, 2016, 06:34:41 PM



Title: 06 A6 3.2 liter doesn't recognize me anymore
Post by: 06A63.2 on August 23, 2016, 06:34:41 PM
Hi All,

New here.  Today my Audi would not start. All electrical accessory functions are working.  Also, my steering wheel is not locked. I ran a scan and came up with a immobilzer malfunction.  It seems that the immobilzer on these Audi's go and then it's off to the dealer to have the entire steering column replaced.  Is there any way to disable this function and get the module to recognize the key again so the car will start?

Thanks in advance.

Jon


Title: Re: 06 A6 3.2 liter doesn't recognize me anymore
Post by: vdubnation on August 23, 2016, 07:28:40 PM
wake up the system hold the high beam + hazards on + holding brake scan 05 acc/start module clear codes turn off everything it should start.


Title: Re: 06 A6 3.2 liter doesn't recognize me anymore
Post by: k0mpresd on August 23, 2016, 07:31:58 PM
you only have to blip the high beams to wake up can bus enough to scan. i have never had to do the hazards, brake, yada trick.

however, he already says he has communication.